1 / 2
Radxa Rock 5B+ Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic and open case for Radxa Rock 5B+
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 91
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Case for the Radxa Rock 5B+. It's fairly basic and open to allow for access and airflow. It's split in top and bottom parts, and requires extra hardware to join both parts.
You can see the exact BOM below, but the way we'll join the top and bottom parts will be through four M2 standoffs, and then four M2 screws on each side.
Place the top case onto its vent face, with the legs facing up, before printing.
BOM
| part | quantity | notes |
| 12mm M2 socket head cap screw | 4 | for the bottom case. 10mm might work too |
| 6mm M2 socket head cap screw | 4 | for the top case |
| 20mm M2 standoff female to female | 4 | for joining both parts. Either hex or circular |