114 models
Print Instructions I recommend printing all components in PETG, ABS, ASA, or another more heat-tolerant plastic. The Pi can get pretty warm in the bottom of the case so printing in generic PLA could cause warping in some places. The 3MF…
Latest Update: Please download the “v2” variants of the case. The original design was done using the Radxa-provided CAD, however, upon receiving my Rock 5B today, the measurements were off. I've made some adjustments to the “v2” version…
For Radxa Zero 3W/E,use official Radxa 5519A heatsink with 1703 fan(SUNON UF3H3-700) connect to +3.3V/GND. Use 4xM2.5 heat set inserts and 4xM2.5*10 countersink screws to fasten the Cover and the Bottom. For Radxa Zero 2Pro,using official…
Simple case for the Radxa Zero3E. This is my first ever 3D design. I made 2 bases and 2 tops. The bases have two options: One with all usb and micro-HDMI connections and another with just the usb-c to power the thing for preset tasks. For…
Snap on Lid and Base 3mm mounting holes a lid, base, and a button up to 50mm fan mount Use a piece of filament for the button hinge. Version 2: widened by 2mm for easier fit, added a little extra thickness to larger IO cutouts. Have a Q6A…
This is inspired by snap fit cases that I've seen for Raspberry Pis. None of them were an exact fit, so I made this one from scratch.
Radxa Zero case with heatsink and GPIO slot
This is a case I made for the Radxa Rock 4 SE using TinkerCad. It's easy to print without supports or rafts with PLA or PETG. Version 2 places a 40mm fan inside the case with ample space for the heatsinks. The nvme ssd version is shaped…
Dvoudílná skříň pro počítač Radxa Rock Pi 4 Plus připravená k montáži ventilátoru 40x40 mm. Rozměry krytu umožňují použít lepený chladič procesoru + vnější ventilátor nebo dovnitř montovaný ventilátor se sníženou výškou. Materiál: PLA…
Increase air flow for SATA drivers Opened the window for OLED display All screws are now using m2.5 Fixed the opening for pi5 USB Fan openings are bigger. The chamfer for bottem plate now are 45 degree for easy printing Remove useless…
This is a case for the Radxa X2l. Case printed with Inland PETG. Button printed with pla. Use 2x8mm screws. Made a window for the power LED using clear UV resin (not required). Printed on Bambu labs P1S.
This is my first upload, so sorry if the design missed anything. The ports are not a perfect fit, but it gets the job done. (new model is slightly different from photo) Ports are wider and holes are merged. Front vent panel seperated into…
The box for the single-board computer Rock Pi s. Box protects the SBC against damage and at the same time ensures good heat dissipation to prevent overheating. The box can be screwed together with an M3 screw. You can find the version…
First time remixing a 3D Print, used blender to boolean the fullsize HDMI INPUT hole and just moved the left side of the faces on the micro HDMI INPUT to make room for both the LED and the USB-C port that replaced the micro HDMI. Took me…
Improved version of my first case remix for this SBC. Enables you to put a dust filter fabric inside the case between the shell and the fan. Also added a heat insert variant. Given the low height only low profile heatsinks (≤ 7mm) do…
A simple case to protect and cool a Radxa Zero 3E with PoE HAT installed. Prints in two halves and slides together. The sliding action also press-fits and retains the PCB stack. I really like this little board, and intend to buy a few…
Simple case for the Rock Pi 4C+. Enables you to use your Pi either passively or with a 40mm 5V fan of up to 20mm thickness. In case you got very chonky heatsinks the taller case part with a 10mm fan will most likely work for you. You need…
ATTENTION! I RIPPED OFF MY SDCARD HOLDER WITH THE CURRENT DESIGN. BE CAREFULL! I will update it ASAP. I designed this to use with my OpenIPC FVP ground station but the case is generic and the step files allow you to modify it to your…
Update 2026-06-29: add opening for 25mm fan Update 2025-06-07: add v2: remove small connection between GPIO opening and Ethernet port Snap fit case for Radxa Zero 3E
A smooth and clean enclosure with hex ventilation holes for the Radxa Zero 3W and 3E: https://radxa.com/products/zeros/zero3w/ https://radxa.com/products/zeros/zero3e/ Prints in 3 parts (top middle and bottom) and 4 legs that slide into…
3D printed case for a NAS using a Raspberry Pi 5, Radxa Penta Sata Hat and 3.5" drives. For complete parts list and assembly instructions visit: https://mattantseng-0.github.io/projects/raspberry_pi_nas
Tested for Raspberry Pi 4 and 5. But I believe also fits Pi 3 I design this base for a Radxa Penta HAT to make the whole device more stable. No extra hardware needed. Use the ones included in the Radxa Kit. If you are going to use it…
Original model by eskimo: https://forum.radxa.com/t/raspberry-pi-3d-print-penta-hat-case-quirks/21063 Remix model by MrVue: https://makerworld.com/en/models/895460-radxa-penta-sata-hat-nas-enclosure#profileId-853279 I've updated the case…
Box for Radxa E20C Bolt：M2.5x10 *4 Nut：M2.5 *4 Fan specifications：4010 ------cuilingji
Box for Rock Pi S single board computer with additional antenna. This model has been adapted from the SBC Rock Pi S version without WIFI so that an external antenna can be efficiently and elegantly added. The box protects the SBC against…
Radxa Rock 3C case Parts: Radxa Rock 3C SBC Hardware: 4 - M2.5 ~4mm heat set inserts 4 - M2.5 ~4mm screws 7 - 5x3mm magnets Print Notes: PETG / ABS / ASA / PLA
Case for the Radxa Rock 5B+. It's fairly basic and open to allow for access and airflow. It's split in top and bottom parts, and requires extra hardware to join both parts. You can see the exact BOM below, but the way we'll join the top…
Remix of https://www.thingiverse.com/thing:6779075 as I couldn't fin one that fit my 2F. Smaller layer height makes the case fit much better (the pic has 0.3 layer height).For the micro SD card you'll need tweezers!
Barebones case intended to be modified according to different use cases. Picture provided printed from PLA with a 0.4 mm nozzle. Tolerances around screw holes are quite tight and might not be achievable with wet PLA or a less precise…
Casing for Radxa Zero - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more pictures , visit here .
BOM - LINK Mounting Instructions - LINK
A simple case for the Radxa X2L SBC with wall mount. The mount is screwed to the wall and the case simply slides into it. The port shield slots into the front then the power/reset button simply slots into the hole at the rear between the…
It is a simple 3D-printed case for the Radxa SBC Rock 4D. It uses magnets to lock the enclosure. It has a simple and modern/elegant design with good airflow.
Prints Not all the models are printabel without support. /!\ the “Botom housing” need support for the cable hooks. Activate standard support interfacing with only the build plate. Use your print profiles for best result. /!\ the “Botom…
The recent Radxa Cubie A7A boast an impressive A733 CPU using only 5V and some 15-20W power. I needed a nice desktop case for it to serve as a daily driver. Hope you like it.
This is a case for the raxda taco board, which is used along with a pi 4 compute module. It can fit 4 SSDs. Original from AceofBase here ---> https://www.thingiverse.com/thing:5811612
OpenIPC Radxa GS case update the case model
A 10-inch rack mount for the Radxa Rock 5B/5B+. No support required Requires: 4x M3*8 screw 4x M3 hex nuts 4x M3*12 spacer If you are looking for the recess design: 10" rack panel for Radxa Rock 5B/5B+ (recess design)
Self-locking (no screws needed to close it). WiFi module USB connector is hidden inside the box (no dangling wires), but requires modified (5.1k resistor) "MX-12" 90° USB-C connector. Radxa and cooler are screwed with M2 bolts (5mm for…
Radxa ZERO 3W 4GB 32GB EMMC x1 https://aliexpress.ru/item/1005006677319461.html?spm=a2g2w.orderdetail.0.0.44404aa6RrHdEu&sku_id=12000039038015030 MP1584EN 3А x1…
It's a super thin design in order to lose some weight. And a mount for skyzone goggles. You need five 2x16mm screws and five 3.5-4mm height copper injection nuts . I've also cutted a camera control board to be the “buttons”. The fan is…
This is a DIY 10 inch rack mount for Radxa Rock 5T for a DIY 10 inch rack that I have built. Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
small adjustment to the air vents to give the model more sci-fi aspect and better cooling
(Work in Progress) I am making another version (v2) that will have enough room for 2 RTL8812AU's and the front cover with rails for patch antennas clips that also fit on HDZero Rail System. changes in V2 removed 3 holes on top add wider…
This is yet another case for the Radxa Taco board with room for 5x 2.5" drives plugged into it. This model differs from others in that there are drive trays. Also, it is a little loud. You'll need … 12V 5015 blower fan 2x m3x20mm round…
I have created a real-life dad-joke (in german at least): This is AnaNAS. The Pineapple, that holds your NAS based on a Raspberry Pi 5, a Radxa Penta SATA Hat and 4x 2.5" SSDs/HDDs. It has a hole in the top where a 40mm fan can be mounted…
This is a small bracket to convert the Ice Tower cooler for the Raspberry Pi to the Rock5B's CPU. I tested this with a thermal pad, but this could feasibly work with CPU thermal paste as well. The heatpipes from the cooler are the…
My first version of my openIPC VRX. Used parts: -JLCPCB Board (my own creation) -2x Tps54560 StepDown Boards (only for some parts) -2x FAN “SEPA HZ25B05” -2x RTL8812EU -4x SMA connector -1x 5-WAY SWITCH -1x Radxa Zero3W -1x USB hub FE1.1s…
This build is tricky the same as the original one was. I only realized that as i sat down to make all things fit: at times the pockets for the M3 nuts are a wee tight and some carefully measured force is to be applied. Sometimes they turn…
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles
Radxa's STP model of the A7S was used for dimensions, so this model should theoretically work. Note: Radxa's STP does not include the SD card slot, so my original model did not include a cutout for that. An updated version of the bottom…
Hi! This is my second ever design. Feel free to comment and I'll try to improve it. The Radxa X4 needed a bottom cover so here you go. Its designed to click in place and to stay away from the heatsink. The two tabs ensure the part in…
This is GS model for OpenIPC and Ruby_FPV based on RADXA zero 3W and 2 M8812EU2 with dedicated location for each component
The box for the single-board computer Rock Pi s. Box protects the SBC against damage and at the same time ensures good heat dissipation to prevent overheating. The box can be screwed together with an M3 screw. You can find the version…
Print Settings: ASA or ABS 5 Walls 5 Top 5 Bottom Alternating Infill 40% Infill of your choice It's quite a lot but the plate needs to be stiff. I used the standoffs, screws and thermal pads that shipped with the GeeekPi Ice Tower CPU…
I just used PLA with regular supports. The top piece has a decent amount that can be a little tricky to use. It uses a gopro mount btw Probably most of the parts: Radxa zero 3W (with heatsink) ufl → sma connectors x4 40mm fan some random…
updated - SD card is now accessible from the rear This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles. Please disregard the antennas used, I'm waiting on…
This case for the Rock5B features a big ol' hole on top for the Low Profile Ice Tower heat sink. Materials Needed: Four screws at least 14mm (I used M3 x 14mm) plus nuts Four M3 x 4mm screws Radxa Rock5B with mounted heat sink (printable…
Tabletop support plate for Radxa X2L, compatible with the presence of the SSD on the bottom side of the board. Print in PLA or PETG, layer 0.2 mm, no supports.
Comes with the freecad project. Hardware: 4x M3x12 Self-tapping 1x M3x18 ish Self-tapping 4xM4x10-16 (i used a tap and bolts, self-tapping will likely do. there is enough clearance for longer screws too) pre-tap before putting it in the…
OpenIPC Ruby_FPV GS Radxa zerro 3w based this is V2 model more light no screws
The versatile Radxa Rock 4D could be a lean NAS server for the home with it's two speedy USB3.0 ports. Or a server with external storage. The case will work even without any external storage. It has space for an top HAT - in this case the…
A 10-inch rack mount with a recess design for the Radxa Rock 5B/5B+. Requires support to print. Requires: 4x M3*8 screw 4x M3 hex nuts 4x M3*12 spacer If you are looking for a simpler flat design: 10" rack panel for Radxa Rock 5B/5B+…
A case made to fit a Raspberry Pi 5 and a Radxa Dual 2.5Gb Router HAT( https://radxa.com/products/accessories/dual-2-5g-router-hat/ ). I put these two together to make a router following Jeff Geerling's Pi Router project(…
A remix of Valentino Hesses beautiful RADXA Rock Pi S - Case Lid with GPIO cutouts.
This is a tough tight build. Edit: Backplate v2 has 2 more millimeters of depth, the side SMA ports adjusted, the ¼" screw threading extended, and exhaust cooling in the back. The extendo is 4 additional mm to make adding 20x20x10mm…
Radxa zero 3w x1 wifi card - RTL8812AU AF1 x2 USB hub x1 40mm cooling fan(5v) x1 5v dc step down x1 3.3v dc step down x1 switch x1 button x1
VRX case using 2 Wi-Fi cards m8812eu2. Radxa zero 3w x 1 Bec 5V 3A (for radxa zero) x 1 Bec 5V 5A (for two wifi card) x 1 BL-M8812EU2 wifi card x 2 usb-hub module x 1 on/off switch x 1 recoding push button x 1 etc.
For a version with screws see: https://www.printables.com/model/1792155 The Radxa Rock 5A fits standard Raspberry Pi 4 cases. However, because its Micro SD card slot sits right on the edge of the board, the card sticks out when using…
Simple case for Radxa Rock Pi E SBC that doesn't need any screws. The SBC slips into the gaps in corner reinforcements in the case and the cap. The cap stays in place with a small protrusion that snaps into a groove in the case's inside…
IMPORTANT! If you have a non-eMMC model variant or going to use the microSD slot you MUST use V5 as earlier versions does NOT have hole for the microSD and will be unusable! A two-piece, snap-fit printed enclosure for the Radxa Zero 3W…
Box for Radxa Zero 3w and wifi adapter rl8812ua, 5 6mm buttons
Here you find two cases for the RADXA ROCK 4C+ : One for the card alone (files ROCK_4C+_case.3mf and ROCK_4C+_case.stl) , the second for the card and official heatsink S2Pi (ROCK_4C+_heatsink_case.3mf, ROCK_4C+_heatsink_case.stl) To mount…
This is a simple mount plate for a 40mm x 40mm x 10mm fan for use with Radxa's Sata Hat board and their officially designed case model (published elsewhere). Their case model is designed to house their optional top board which includes a…
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
This is the OpenIPC VRX case model. It has been designed specifically for the Eachine EV200D goggles, with no consideration for other products' goggles. Since the goal was to achieve a compact size, a smaller BEC must be used to fit into…
This is a variation of basically all of the basic RPi/SBC cases out there. I needed to make one specifically for the Radxa X4, with a cutout for a 2280 NVMe drive. I wound up cutting out a sizeable piece for other reasons. I included a…
Print in PETG, no supports needed. Turn your Rock 3A into an OpenWRT WiFi Access Point!
Remix for the Radxa X4 Cover done by me. Printed 20% infill. Standard Supports. 4 layers wall. But I'm intermediate-noob at 3D printing, other settings might work. ---- Please, consider my buymeacoffe. I'm new to this and (as you can see)…
Another case for the Radxa and OpenIPC Bonnet. Fits a 10mm 20x20 fan. If you use the same DC barrel connector you need to cut away a piece of the rubber so that the antenna pig tail fits in the hole.
Mounting your Radxa E25 single board computer against the wall has never been so easy! Print this wall mount, screw it against your wall and slide your Radxa E25 into the mount. Need to access your Radxa E25? Just slide it up from the…
Simple, easy to print case for Radxa 5B+ Updated to add a OLED screen, also added a script and instructions to my GitHub: https://github.com/RFLTools/Radxa5B-Plus-OLED-Display The script displays the IP, and cycles hostname, cpu temp, and…
modified radx 3e case lid with poe hat v1.2 which is higher than v1.0
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
A case for the v1.61 version of the Radxa Taco carrier board for the Raspberry Pi CM5. This is specifically for the updated v1.61 Taco board for the CM5 , which has a different port layout that is incompatible with the older v1.3 board…
Case for Radxa Rock Pi 4B+ Heatsink from Embedded Computers. This heatsink is non-standard and therefore I could not find a case for it. Therefore, I made my own. Embedded Computers sells a case for it but I felt it was kinda expensive…
Simle case for Radxa Rock 3A board and 3C (not tested) You can print without support if you can print the bridges. Use minimal support just to play safe. Category: Electronics
Did you order a bunch of cheap Radxa RockPi 4b Pluses from embedded computers ca? Did you realize that you didn't order the cases and when you went looking, none of them fit the bigger heatsink? Well you found the right listing! This is…
i didnt get one so i made it myself
An extended lid for the KKSB ROCK 5B case for the Radxa ROCK 5 Model B , designed to provide enough space for a Power over Ethernet (PoE) module - or anything else which adds a bit too much height for the original lid to fit. As the PoE…
For the snap fit version see: https://www.printables.com/model/1774493 This is an updated version to use M2.5 x 8 screws ( M2.5 x 5 minimum ) Using this case in a backpack I found that sometimes the lid will come loose so I added screws…
recommend using petg for covers as they are designed to bend to smush the wires in place
Used in my Home Lab video Important: You will need to cut the mod plate where you are installing the mod (Match your cut to the hole), otherwise you can not insert the Radxa hat You will also need to cut a tiny corner, you will see it…
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
modified radx 3e case lid with poe hat v1.2 which is higher than v1.0
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
Simple case for Radxa Rock Pi E SBC that doesn't need any screws. The SBC slips into the gaps in corner reinforcements in the case and the cap. The cap stays in place with a small protrusion that snaps into a groove in the case's inside…
Used in my Home Lab video Important: You will need to cut the mod plate where you are installing the mod (Match your cut to the hole), otherwise you can not insert the Radxa hat You will also need to cut a tiny corner, you will see it…
Simple, easy to print case for Radxa 5B+ Updated to add a OLED screen, also added a script and instructions to my GitHub: https://github.com/RFLTools/Radxa5B-Plus-OLED-Display The script displays the IP, and cycles hostname, cpu temp, and…
A case made to fit a Raspberry Pi 5 and a Radxa Dual 2.5Gb Router HAT( https://radxa.com/products/accessories/dual-2-5g-router-hat/ ). I put these two together to make a router following Jeff Geerling's Pi Router project(…
