Radxa Penta SATA Hat Case Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.70 net (excluding VAT)
For file: Radxa Penta SATA HAT Case Fan Mount.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 40.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple 40mm x 40mm x 10mm top fan mount for the Radxa Penta SATA Hat Case for the Raspberry Pi 5.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a simple mount plate for a 40mm x 40mm x 10mm fan for use with Radxa's Sata Hat board and their officially designed case model (published elsewhere). Their case model is designed to house their optional top board which includes a fan, a button and a small oled info display however there has been no new production runs of the board at the time of posting.
As a result, I have made this small mounting plate to fit in where their board would and attach your own 5v fan to it to be plugged directly into the fan header on the Sata Hat board.
Printed on a Sovol SV06 through PrusaSlicer with 0.40 mm nozzle diameter and 0.30 layer mm layer height and fit tested on two separate resin prints of the case. Used Duramic 3D PLA Plus filament.
Prints best with the outer holes facing up.