Radxa Penta SATA Hat Case Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple 40mm x 40mm x 10mm top fan mount for the Radxa Penta SATA Hat Case for the Raspberry Pi 5.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple mount plate for a 40mm x 40mm x 10mm fan for use with Radxa's Sata Hat board and their officially designed case model (published elsewhere). Their case model is designed to house their optional top board which includes a fan, a button and a small oled info display however there has been no new production runs of the board at the time of posting.
As a result, I have made this small mounting plate to fit in where their board would and attach your own 5v fan to it to be plugged directly into the fan header on the Sata Hat board.
Printed on a Sovol SV06 through PrusaSlicer with 0.40 mm nozzle diameter and 0.30 layer mm layer height and fit tested on two separate resin prints of the case. Used Duramic 3D PLA Plus filament.
Prints best with the outer holes facing up.