1 / 3
Radxa Penta 3.5"/2.5" drives NAS case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a NAS case for use with the Radxa Penta hat. It will hold 4 hard drives using 4 riser cables.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 81
- Makes
- 0
- Views
- 1,014
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Prints
- Not all the models are printabel without support.
- /!\ the “Botom housing” need support for the cable hooks. Activate standard support interfacing with only the build plate.
- Use your print profiles for best result.
- /!\ the “Botom housing”, “Drive bay”, and “Top cover” are long prints (8h plus)
- You will have to print the “Drive tray” and “Bay connector hold” 4 times
Material needed:
- 1x SBC (supported by Radxa Penta Sata hat → do your research)
- 1x Radxa Penta sata hat ( Comes with standoffs and screws to hold the drives )
- 4x 20cm Sata power and data extantion cable
- 4x M2.5 x 8mm
- 8x M3 x 10mm
- 12x M3 plastic heat insert
- 4x M3 x 10mm : countersunk head
- 1x 12VDC external power supply with 5.5mm barel jack
Top cover options :
- 92mm fan
- /!\You will have to build your own power cable between the Penta JST-2x5 and the fan connector
- Radxa sata hat top board
- /!\ You might need to modify / lengthen the wires between the Penta board and the top board.
Raxda documentation:
https://docs.radxa.com/en/accessories/penta-sata-hat/penta-for-rpi5