Raspberry Pi 5 + Radxa Dual 2.5Gb Router HAT Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable case for a Raspberry Pi with Radxa's Dual 2.5Gb Router HAT, with holes fit to the ethernet ports
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 1
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
A case made to fit a Raspberry Pi 5 and a Radxa Dual 2.5Gb Router HAT(https://radxa.com/products/accessories/dual-2-5g-router-hat/). I put these two together to make a router following Jeff Geerling's Pi Router project(https://github.com/geerlingguy/pi-router) and couldn't find an enclosure anywhere so decided to make my own, starting with a case for a different Raspberry Pi 5 HAT mostly to simplify fitting the Raspberry Pi portion of it.
Print Settings
Filament Used: Buddy3D Grey PETG
Layer Height: 0.25mm
Supports: I used organic supports on just the bridge(supporting the 2 upper ethernet ports) on the top component, but I'm pretty confident you could get away with none.