Raspberry Pi 5 + Radxa Dual 2.5Gb Router HAT Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable case for a Raspberry Pi with Radxa's Dual 2.5Gb Router HAT, with holes fit to the ethernet ports
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A case made to fit a Raspberry Pi 5 and a Radxa Dual 2.5Gb Router HAT(https://radxa.com/products/accessories/dual-2-5g-router-hat/). I put these two together to make a router following Jeff Geerling's Pi Router project(https://github.com/geerlingguy/pi-router) and couldn't find an enclosure anywhere so decided to make my own, starting with a case for a different Raspberry Pi 5 HAT mostly to simplify fitting the Raspberry Pi portion of it.
Print Settings
Filament Used: Buddy3D Grey PETG
Layer Height: 0.25mm
Supports: I used organic supports on just the bridge(supporting the 2 upper ethernet ports) on the top component, but I'm pretty confident you could get away with none.