Radxa Rock Pi 4B+ Heatsink Case for Embedded Computers' Heatsink.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Radxa Rock Pi 4B+ Heatsink from Embedded Computers. Heatsink is not a standard one, requires custom case.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case for Radxa Rock Pi 4B+ Heatsink from Embedded Computers.
This heatsink is non-standard and therefore I could not find a case for it. Therefore, I made my own.
Embedded Computers sells a case for it but I felt it was kinda expensive over the heatsink only, especially for a 3D printed part. They also don't provide a model for it.
This case has 2 mounting methods. You can use the countersunk M3 screws in the heatsink to go into the self-tapped holes in the case, or use SHCS M2.5 screws to secure into the standoffs used to secure the Radxa Rock Pi 4B+ to the heatsink.
Does not include hole for MicroSD card slot as this SBC has intergrated EMMC. Also no antenna hole so plug in a uFL antenna before closing the case.
Print in provided orientation, no supports or overhangs. Fusion file included if you want to modify it.