Counting matching models…
Get fan and heatsync combo at: https://www.amazon.com/gp/product/B07PCMTZHF/ref=ppx_yo_dt_b_asin_titl
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Buddy Board Casing RC2.0 - 7 July 2022 Uploaded the buddy for Prusa MINI Clones and the Original MINI Hardware. Added more rigidity to the front part. A bigger bar with 2 screws instead of 1 for better alignment too… Added an extra square…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
a Raspberry Pi4 "heatsink" case is smaller than most cases, and existing Mk2/Mk3 mounts were a bit to large. so I've made this smaller one. If you add a little strip of rubber foam in the bottom it will be a tight fit
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed Raspberry Pi 4 mount made to fit the Passive Aluminium Case Mount for Original Prusa Enclosure. I have designed the raspberry pi can be removed from the top with ease. Also I have added windows to vent out the heatsink…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Raspberry Pi 4 Server Panel This is a redesign of the original Pi 4 Server Panel. This was done due to my server rack slightly overheating in the summer. Rest of the Server Panel Parts Brush and Switch Server Panel 2U Server Rack Mount…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Determine Raspberry Pi 4 maximum heatsink height by trial and error. I build this after struggling to figure out what height of heatsink to order to fit a case I wanted to use with my Raspberry Pi 4. No matter how I manoeuvred my calipers…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a hotend mount for the TZ v2 hotend for Voron Stealth Burner. Based on the Bambu style hotend. Care was taken to ensure good airflow for the heatsink and to direct the exhaust air upward to avoid spillover that can lead to ABS…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
UPDATE 02 April 2023 I have added the STEP and f3d files of those who want to edit the design. This is the fan bracket that is slotted over the heatsink of the X1. I designed this as those I saw were restrictive ducts that create back…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
Remix of Marius' awesome slim case for the PiZero2W, with a cut-out of the heatsink that some are delivered with.
Install a REVO on your SV08! Please note: You can purchase one ready-made here if you don't have the ability to machine aluminum locally. I earn a small commission if you do:…
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
🧩 Gridfinity DDR RAM Stick Holder — 10 Slot, Stackable This is a compact, workshop-grade Gridfinity module designed to store 10 desktop RAM sticks securely and visibly. Perfect for: PC builders Repair shops Hardware flippers Tech…
This is a custom mount that fits right onto the CB1 heatsink to mount a fan to it. The 4x holes for the fan needs to be taped (m3) theirs no room for brass inserts. Hardware needed 1X 3010m Fan 4x m3 x 14mm fan screws 4x m2.5 x 18mm…
This is a mounting solution for an aftermarket SSR module with tall heatsink for the Qidi Plus4. This mounts in place of the factory SSR PCB using the three mounting holes. You also have the option of mounting a 40x40x10 cooling fan onto…
Fully Tested v1.2.1 Hardware Needed: 1) E3D Revo HeaterCore (100k Creality Sprite) | 1pcs - https://e3d-online.com/products/revo-heatercore?variant=41549447168059 -…
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
Modified backplate to allow use of a common 9x9x12 heatsink on the camera board's chip that can overheat in hotter enclosures over time. https://www.amazon.com/MECCANIXITY-9x9x12mm-Heatsink-Transistor-Amplifier/dp/B0CMPYZS4T There are…
The RTL-SDR Blog V series is a decent little receiver, but as a dongle it hangs delicately off of a PC's USB port and is easily broken, especially when used portable with a laptop. This case securely encloses and supports the dongle and…
2020-07-09: I needed a VESA mount for my raspberry pi 4 which has this heatsink installed: https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4?variant=31116595888211 However I thought it would be nice to just be…
Reference of current GeeekPi heatsink/cooler Links for the CAD projects I use to make the change: Top case (no STEP): https://www.tinkercad.com/things/36RtgzKxmBp-rpi-4-case-top-for-geekpi-fan Bottom case (STEP):…
Tired of picking up hook that felt along with picking up a towel ? ME TOO ! I've designed the hook to be extra thick and durable, I wanted this thing clip onto the heater and to last forever. Obviously safer option would be PETG, but I've…
I added a cut for heatsink
I decided to create this mod after noticing how sharply the driver temps changed up and down, this led to me tearing my U1 down to investigate. What I found, was that the stock heatsink was placed on the topside of the driver chips.…
This model modified the original fan mounting part to fit 80mm fan, which allows more air flow to make the GPU even more cooler. Also the inner has been enlarged a little for the shrinking of ABS prints. The original model was created in…
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…
I strongly recomend printing with PETG or any better heat resistant filament, as PLA might deform inside due to the high temperatures the inside of a computer can get while gaming or any high load task. Specifications: -No supports…
Currently this file is uploaded as STEP AP242, which is incompatible with Solidworks. I will upload a version which is in STEP AP214 or AP203 which are compatible with Solidworks. I just took 2 models (e3d threaded heatsink and e3d v6…
Print using Supports (Everywhere) then pick open the gaps for the ports. Designed For: PI Zero 2W ETH USB Hub Hat (b) SKU: 20416 Part Number: ETH/USB HUB HAT (B) Brand: Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Zero Series,…
remixed IamStarGoat's model to be able to fit over the heatsink for the CB1
There are already very good alternatives available, but none of them seem to force the air flow on the fins of the BTT-made CB1 heatsink. This version tries to make sure that all the air exits only through the fin channels (give or take)…
This Raspberry Pi Zero 2W case was designed around the Geekworm C296 Heatsink to have a low-profile and sturdy construction. The case, heatsink and Raspberry Pi are held tightly together with M2.5 screws and nuts. The nuts are inset flush…
This is a remix based on https://www.printables.com/model/214126-eva3-dragon-hotend-mount-hex that allows to use a Trianglelab CHC Pro hotend setup with the standard EVA3 carriage assembly that can be found here https://main.eva-3d.page/…
replaces the part covering stepper motor on the toolhead of any K1 printer to allow addition of a stepper motor heatsink to reduce heat buldup in the extruder and hopefully reduce or eleiminate jamming. PRINT IN A HIGH TEMP FILLAMNET. i…
The blue plastic fan shroud that came with my printer snapped right in half. After supergluing it for a while, it just became too much hassle. While waiting for a new fan, I remodeled and resin printed a replacement. This is a little more…
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
This is a case for the Rock Pi 4 SBC with installed large heatsink. The top part snaps on the heatsink to create a tray that slides into the base part. Thanks to another snap fit both parts should stay together without screws. There are…
A case for raspberry pi zero 2 with quick micro-sd card access and good cooling options. You can fit up to an 8mm high heatsink and if necessary, you can attach a side blow fan. For assembly you will need: 1 Bottom half 1 Top half 1…
remixed CB1 Fan mount for CB1 Heatsink. 40 mm fan style
Preamble I had originally posted this on Thingiverse and a number of others have shared it here. Since I now have a stable presence here on Printables I guess I should share it here as well. The fact that others were sharing it wasn't…
Fan Mount for BIQU CB1 Heatsink. I have included 2 files. One for mounting screws from bottom (Threaded) and one to screw down from above (this was made specifically for the Manta m5p board, as the screws are placed from the top down, but…
Fixed version of the Raspberry Pi 4 B top case with the GeeekPi Heatsink / fan , requires the base top of the original case model . Fits the GeeekPi Heatsink / fan combi .
extruder motor heatsink for prusa mk3s. I thought of creating this heatsink because I always thought that the engine heats up too much and can ruin the print quality a little. because of the heat that enters the filament pusher…
Halterung für den Lüfter auf dem Kühlkörper vom P1P. Lüfter kann über den Gcode angesteuert werden, mehr dazu im BambuLab Forum , ich bin das Problem umgangen, indem ich die Kabel abgeklemmt habe, die für die Steuerung zuständig sind.…
Work well with Magsafe Case + Magsafe Charger 28x28 Heatsink can be added for cooling
The Sovol SV06 faces a challenge in which prints with frequent retractions tend to fail due to clogged nozzles. This issue is caused by heat creep, as the heat dissipation is inadequate. To resolve this problem, the following steps are…
I couldn't find a Raspberry Pi 3B+ case compatible with the kind of cooling fan that I have. So I decided to make one myself! Category: Electronics
Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws
Parts needed for this install: Thermalright AXP90-X53 M3 S Threaded Inserts Mini Heatsink Kit M3 Button Head Screws
Remixed from “RaspberryPi3 Mk3 Case” by agarajag: https://www.thingiverse.com/thing:3004038 Changed the case design to fit a heatsink with a fan (by GeeekPi on Amazon) inside the enclosure.
This is a lightweight, efficient fan duct designed for the Anycubic Kobra S1 . By optimizing the airflow directly through the heatsink, it improves cooling efficiency, prevents heat creep, and helps eliminate frustrating filament clogging…
Seeedstudio now ships the Xiao ESP32-S3 Sense camera with two small heatsinks to reduce chance of overheating. These heatsinks are ~4.5mm too tall for the model. This remix cuts a 25mm x 15mm hole in the base to provide clearance for the…
Print upside down with no supports, any layer height should do.
In the Anet A6 kit the 40mm fan is bolted against the cooling rib to keep the filament assembly drive together. This is done without no support for the fan. I made this spacer/standoff design to give proper support for the 40mm cooling…
I have remixed this case to be compatible with Pi TV Hat. Update: Added v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: SUNLU PLA+ White Category: Electronics
Legion Go NVME Battery Cover with space provision for the copper heatsink. Add insulator & airgap b/w battery and ssd to protect battery from heat damage. Careful in peeling off flexible antenna from the original battery cover.
I had an extra small heatsink so I wanted a second cutout. I only changed the “Top”, so go to the original model to get the bottom half!
Shroud improves cooling by 15%+ on V100 16GB version. Organic tree generation with 100% first layer density and 3mm first layer expansion worked best for me for best bed adhesion.
This is my attempt on using a silent 4020mm axial fan for cooling the heatsync. Haven't tested it yet during printing, but after my first tests on the bench, it feels like the airflow is about the same as the tiny radial noisy fan that…
This is a vertical mount case for the Raspberry Pi, that uses the 2.5″ sata SSD drive as the main body to mount, you can use a 40mm fan or a aluminium heatsink. Adapter SATA to USB:…
Overview Adapter for the Dell stock heatsink to a 120mm PWM fan for the Dell Optiplex series 5 (2015-2020). (Check out wikipedia for an overview of optiplex generations). This makes the computer a lot quieter. The fan barely fits, so…
Please refer to the original model page for full details, as the only difference in this version is the location of the main fan. Ensure you cut only the marked fins and seal the fan with tape, as I have removed the screw holes to achieve…
Shroud for 4020 axial fans and 40x40x11 heatsink for voron nema17 motors on the trident (Only tested with Noctua 4020 fans, other fans should work, but not sure if the wire slot location is the same on most 4020 fans insert voron BOM…
Remixed version of model made originally by jupiterbjy. I tweaked this model a little, by resizing borders and adding walls behind heatpipes to ensure that air is directed properly. There is a little bit more room on top for 60mm fans to…
Didn't have any 2510 fans on hand so I remixed the 2510 duct to use 40mm fans. Did not test printing on a .4 noz as I have .6 installed. You will need 4 M3 heat set brass inserts for this model. If you are printing this it is assumed you…
Small remix for V6DM Heatsink from Trianglelab (https://aliexpress.com/item/1005005195556343.html)
The Raspberry Pi 4 really benefits from a heatsink. I got this cool Aluminium Extrusion heatsink case for the Pi 4 from Pimoroni for £12. Lots of shops sell them including Pi Hut and Adafruit, some places call them "Aluminium Armour…
raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink(from aliexpress) x1002 standoffs and flathead screws were not used, you need M2.5 SHCS longer than 10mm Raspi reset button can be pushed on the case. The case…
This is a model of the coupling that threads (M10) into Creality's modified version of the E3D V6 heatsink for mounting to the E3D Titan direct drive extruder. I suppose you could print this, but my intention of sharing is for it to be…
A 40x40x10 heat sink cooler adapter for the coral TPU. Designed to fit on Dual TPU Adapter from https://mbs-shop.online List of non-printed items: 40mm heat sink from amazon 2mm thermal pad from amazon (4x) M3-8mm (3mm-0.5) from Lowes…
This is a CAD model for the Dual Fan Heatsink Case for Raspberry Pi 4 , ideal for CAD designs that require mounting this Heatsink case. The original design (however the bottom half seemed to be the wrong size for me) can be found here .
Modified K1 series camera mount to shift the view down and to the left by 5° (See picture for camera view - can now see front of build plate), and allows a heat sink to be installed on the camera chip for higher chamber temperature…
I print alot of ASA and it gets very hot inside the enclosure, i wanted to improve the heat dissipation on the stepper motors. These mounts/clips i design allow you to fix a simple 40*40*11mm heatsink below the stepper motors. They work…
Simple remix of case from John: removed the logo slightly enlarged the hole for the heatsink made holes for screws changed the bottom for one from original model
Based on the design by Drew_B and using the dummy Rpi4 model by Olvin, I created this Raspberry PI 4 case to attach it to my Ender 3 v2 sides. It is designed to have minimal impact to air flow obstructing the massive aluminium heatsink,…
sample Klipper config [temperature_fan CB1] pin: FAN_x # see aliases kick_start_time: 0.8 off_below: 0.8 max_power: 1.0 sensor_type: temperature_host control: pid min_temp: 10 max_temp: 80 pid_kp: 1.0 pid_ki: 0.5 pid_kd: 2.0 min_speed:…
I was looking for a small case for my home assistant pi 4 setup. I am using the geeekworm x862 ssd drive along with the 11mm embedded heatsink. This is a remix of https://www.thingiverse.com/thing:3714695 .
i got annoyed with the lack of endoscope attachments for the prusa mk3s so i designed this thing it attaches to the left heatsink fan and points at the nozzle you need a bit longer screws to make it fit as the original ones are a bit…
The original model is great but lacks the possibility to put heatsinks on the back of the IR-LEDs. I added two pockets with 11x11mm.
A simplified 3D model of our heatsink, part of a cooler case for Raspberry Pi 4 model B. Use for evaluation of aesthetic only! To be used only with CooliPi 4B CASE. The real heatsink is made from anodised aluminium and is for sale at…
I've been wanting to get rid of that dysfunctional piece of plastic for a long time and finally did it without bothering, but I admit it could have been done better. The stock holder inhibits the airflow of the blower fan and weighs a few…
This is a clip that can be used instead of the silicone ring on the M.2 NVME heatsink. I made it because the silicone ring is easily hardened and broken by heat. Designed for slim 3mm heatsinks, mostly used in SFF systems. If you use a…
Before you print This is a WIP project (work in project), almost done in fact, the photos you will see its from all the prototypes I made, some of the problems I found in the assembly are corrected. This project it's compatible with…
Found a simple and awesome model for covering the CM5's heat sink fan. Made some changes so no washers are needed and it doesn't hit the fan. It also directs the hot air out of the sides. Heat sink used:…
Heatsink to prevent clogs on the extruder without the need to reduce stepper voltage. This part must be machined out of aluminum or other material with high thermal conductivity. For standard K1 and K1C a small cable chain riser must be…
This is a 5015 Blower fan adapter for the stock heatsink cooling fan shroud. The setup is more effective than using 3010 or 4010 Axial Fans. You may use two screws to secure it on the stock fan shroud and another pair with nuts to attach…
This is a case for a raspberry pi 4b + the Geekworm heatsink/fan without the screen or the pi cam mount per the original model. I also included a remix of Malolo's vertical stand to fit this slightly wider case. RPI_4_Case_B is the remix.…
As everyone knows, the extruder motor on the Prusa i3 runs hot. I wanted to add heat sinks, but have heard of the thermal adhesive not sticking long and them falling off. This heatsink clamp adds compression to the two side heatsinks,…
This case has ventilation to run an Orange Pi 3 LTS with no fan or heatsink. Options for T-slot rails on the side, bottom, or none. Download one ‘bottom’ piece to match your needs. For my use running MainsailOS for klipper, this seems to…
My model was made four years ago, which I brought over from thingiverse. I don't know why Einsy's box opens inside. This makes it very difficult to access the wires. I flipped the original box and tweaked it slightly to cover more at the…
Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…
A case for the Raspberry Pi Zero (or Zero 2) W. Has a screw hole at the bottom to use a standard tripod screw. I didn't use any screws to attach the lid to the body, just an elastic band. Original model has the required hardware to use…
This adapter is to direct part of the 120mm fan air flow to allow for active cooling for RAMs. You will need 4x M3x5x4 threaded heat inserts so you can thread the fan directly to the adapter. You will need 2X CPU heatsink fan clips…
I had a lot of 14mm heatsinks laying around, so I changed the NoIR Model to fit those. And because I wanted a blank front, I removed the lettering. You need 4x M3x10 screws to put together the front and the back. Thanks to @Paul_GD for…
This is a model of Creality's Modified E3D V6 heatsink that is used on the CR-10 V2 & V3. I suppose you could print this, but my intention of sharing is for it to be used as an aid for designing modifications for the CR-10 V2 & V3. STL…
I got tired of overly complicated fan mounting solutions. This Fan clip has no muss, no fuss. It is meant to take M3 screws to secure the fan in place. There are two versions of the fan clip, one for M3 heated inserts and the other is…
This is for the homies in hot climates. The parts are provided in the intended print orientation and do not need supports. You can use just about any material, these won't see practically any heat. I recommend at least 3mm brim on the…
print with ABS or ASA M3 screw to mount bltouch and fan
![[UPDATE] Bambu Lab P1P MCU heatsink fan bracket](https://media.printables.com/media/prints/504764/images/4251291_083caa47-8665-4d5b-9562-5041119008ea/lufterhalterung_hauptplantiene_v3_mit_mutter_baugruppe_vlo.png)
