1 / 13
Mirrored Einsy Case for Prusa Mk3 (with heatsink window) — image 1
1 / 13

Mirrored Einsy Case for Prusa Mk3 (with heatsink window)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I flipped the original box and tweaked it slightly to cover more at the bottom.

Rating
0 / 5
Likes
20
Downloads
88
Makes
1
Views
637
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

My model was made four years ago, which I brought over from thingiverse.

 

I don't know why Einsy's box opens inside. This makes it very difficult to access the wires.

I flipped the original box and tweaked it slightly to cover more at the bottom. I made an (optional) opening for the heat sinks behind the TMC drivers.(The heat sinks are surprisingly hot to the touch.)

Really easier to use!

Wire conduit version: https://www.thingiverse.com/thing:4169443

update 2020. 02. 08.:

  • I moved the cable connector so that heat sinks can be installed inside.
  • I put a vent in the top of the box above the TMC drivers.
  • There were more vents on the door.
  • An optional 30mm fan lock was installed on the door. (I connected a 12V fan to the 5V connector. See picture. Quiet, but it moves the air.)
  • I made a aligment helper for the rear heat sink.

 

Zen3D

Tags