Counting matching models…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. I modified both the original and a…
after printing you will need 4x m3 nuts that you will install on the bottom of the plate. you will need 4 m3 x 10mm bolts for attaching the plate to the to the bottom of the printrbot, i designed them to be counter sunk to prevent…
See my first remix at https://www.prusaprinters.org/prints/147328-big-einsy-case-for-raspberry-pi-zero-w-2 for the basic description. To mount to the Bear frame use (4) M5x10 button head screws. If you are not mounting a fan, just screw…
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
If you plan to build custom Prusa MK3 with thick steel frame you can use this part to hold Einsy box in place on frame with zipties. Feel free to remix for various thicknesses. The tabs on bottom are not really useful but the top one is…
Introduction I wanted a control box that met the following criteria, and couldn't find one, so decided to make my own: Fits both the Einsy RAMBo and a Raspberry Pi. Case fans to prolong the life of the enclosed electronics. All parts fit…
Problems I am attempting to solve: Original Case was extremely cramped. Original Case was a pain to mount to the frame Original Case didn't have very good wire management Original Case was a pain to get into Design Goals Has to print…
I did not realize they were using M2.5 hardware originally. (downloaded the file only to rediscover it later on) I enlarged the holes in the design to accommodate for the upsized hardware, and made them “acorn” shaped to avoid and…
Printed with Prusament Orange PETG and Prusament Jet Black PETG 3MF files “for XL print” are projects ready files to be printed on a Prusa XL 5 heads.
This remix of this nice Big Einsy Case is optimized with Plug & Play for Maintenance. My idea was to get the printer quick out of my enclosure, which was a little hassle until these successful upgrade, because the Power Supplier and LCD…
THIS ENCLOSURE IS STILL WIP THEREFORE PLEASE USE IT AT YOUR OWN RISK (The Bill of materials is also not done yet, sorry.. Just know you will need alot of different M3 screws, many nuts and even more washers!) This is a modular enclosure i…
This is a modified version of the Einsy Base part where the removable cover for the Pi Zero is already removed. In addition, there is a cutout for a USB OTG cable that can be attached to the Pi Zero, to use with a USB camera or a USB hub.…
This is a remix of the Big Einsy Case (Version 20.04.23) by creator "Boogie". I have added a removable opening to allow access for a Raspberry Pi Zero /Zero 2 etc- Requires 2x M3x8mm screws + square nuts. I also increased the amount of…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
I remixed the original RMU MK3 brackets from filamentbuffer.co.uk to fit my setup with the Big Einsy Case and squash ball feet and the Bear X upgrade. it is a snug fit but fits fine. Update: 13/09/2023 Added new file MK3 Upper Bracket Big…
Introduction: I print a lot of ASA. I have an actively heated enclosure that gets up to 110F. On longer prints, the Einsy would throw an overheating code. My solution was to draw in cold air from the room to cool the Einsy. Nobody had…
I modified the case to add a 4010 cooling fan. This is the workaround to fix the TMC overheat problem. You wont have access to the piZero header with this mod. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…
I just needed to put a 5010 fan, the holes for the screws is 3.5mm
I've printed the BigEnsy case (BF3Design version). And bought the MMU2s after…. So I needed a solution for this, without printing the whole case. Here it is :-) You'll find version for mmu2s print as the pictures shows it, or for single…
I installed a Raspberry Pi Zero 2 W shortly after they came out but found it ran a bit hot, around 66°C at idle because there is limited air flow to the CPU since it faces the Einsy RAMBo board. I worked up a design with a fan for…
I have been on a journey to fix my layer shift issues recently, as I am trying to print ASA in a pop-up enclosure and the cause might be because the Einsy board was getting too hot. Going off of the original model that optimizes the…
Redesigned R3 Einsy base, with longer extruder cable clip. Posibility to use cable ties for better fixation of the extruder cable sleeve. STEP files are included (I had to make it from scratch), so it easily can be reverted to the…
Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…
I have an old MK3S+ that I have in an enclosure, which I have modified to have active heating ( Active heater mount for Original Prusa Enclosure by Scotsguard | Download free STL model | Printables.com ) which maintains 50°C in the…
This is a remix of plaidbear's reinforced braced Einsy door mod to brace the Z axis to the Y axis, using the stock Einsy base, to prevent the Z axis from wiggling. The original design uses M3 screws with printed nuts and requires you to…
RAMBo board inverted. It can't attach the Raspberry Pi directly to the enclosure. It also reinforces the frame. It prevents the sleeve of the extruder cable from slipping out. See my blog for more information. (it's Japanese) Print…
These are models to upgrade your Raspberry Pi Zero 2W to a heatsink and maintain original aesthetic, only with a slight increase of height compared to the original design, it was made to be as slim as possible. If you still feel…
For my enclosure I am moving all of the electronics outside, so I needed a solution for re-homing the Einsy board and managing the cable anchor points for the extruder and heat bed at the printer side. For the Einsy side, I chose to remix…
Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
This is basically the same as the original, but includes a cutout in the door for the X-axis motor cable strain relief, and better aesthetics. Previously, either the heatbed or X-axis cable had to run through the bottom of the case and…
Big Einsy Cove Noctua NF-A4x10 5V. Noctua NF-A4x10 5V: https://www.amazon.de/dp/B00NEMGCIA Fan can be directly mounted to the Einsy Board 5V on the top right. You have to use the 2pin Adapter from the from the included accessories and…
Same printing and assembly instructions as the original. Only shifted the rear chamfer to better fit the frame.
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. I modified both the original and a…
When you are printing with your PrusaBox is important to maintain cool your einsy and RPi, at the beginning I was using the cooling duct designed by @colin but when I mounted the RPI It was not able to fix in the correct place, so I have…
This is a remix which was made to include the ribbon cable for the Pi's camera while leaving the raspberry pi zero (2)'s heatsink facing outwards . To accomodate the flipped pi you will need to disassemble the back of the einsy cage and…
Update: I made a new remix that adds a 40x40mm fan . MK3S+ Einsy Base with larger back opening for better access to rpi and its connectors Installation: Follow the assembly guide in reverse order, undoing only the steps that seem…
after printing you will need 4x m3 nuts that you will install on the bottom of the plate. you will need 4 m3 x 10mm bolts for attaching the plate to the to the bottom of the printrbot, i designed them to be counter sunk to prevent…
Based on the excellent model by KalleKnall, the following changes have been made. The aim was to supply the electronics with fresh, cold air from outside the printer housing and to transport the warm exhaust air back outside. In addition,…
This is a custom-designed holder for the Einsy Rambo board , created for installing MK3S+ electronics into the MK4 steel electronics box . 💡 Use case: MK3S+ rebuilt into MK4 frame reuse of original Einsy Rambo board hybrid / custom…
This is based on Prusa mk3 Einsy - Frame brace from Sendeva . I have added some chamfers, short by 12mm so now it is flush with Einsy box. Print with 5 perimeters, 10 top, 10 bottom layers or so to achieve some stiffness. You will also…
I really like Boogie's Big Einsy case with BF3Design's remix, and this is just a minor remix, but with the RPi Zero W 2 it makes a big difference! By routing the LCD screen ribbon cable along the right side of the box you can mount the…
See my first remix at https://www.prusaprinters.org/prints/147328-big-einsy-case-for-raspberry-pi-zero-w-2 for the basic description. To mount to the Bear frame use (4) M5x10 button head screws. If you are not mounting a fan, just screw…
The original Big Einsy case is a great idea, but it was imperfect from my point of view: - used too much fillament - had ugly vents - it was difficult to route the cables in there - used countersunk screws for the lid - did not have place…
Zaribo Raspberry Pi Einsy Rambo Mount. Please see the blog post below for the assembly tutorial. Assembly Tutorial
Remix of Raspberry pi zero einsy cover of original prusa one. Just aesthetic mod
Looked around for a solution that I was looking for, but couldn't find exactly what I needed. Really have liked the design of the original big Einsy case over the years, but have found issues that I wanted to resolve. Majority of these…
Small adding hole on the case easier to slide the nuts . i forgot to add the stl.. Simple , pratique , efficace, aéré , léger, avec porte, et plusieurs fixations pour bien ranger les câbles . Impression sans support , tout y est . Et…
First off, great idea by Krisas Man for the flipped design. Full credit to him. Secondly, thanks No WaterMark for the ribbon cable path. I did some adjustments: Re-aligned the mounting holes with the actual Pi Zero 2 W dimensions Changed…
I noticed, that my Raspberry Pi Zero 2 W got pretty hot running the OctoPrint web interface so I remixed the original cover from Prusa Research to hold a 30mm fan. The fan can be plugged into one of the spare 5V ports of the Einsy Rambo…
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
Inspired by Colin ( https://www.printables.com/model/109599-prusa-box-enclosure-einsey-motherboard-cooling-duc ) I made my own version which is able to fit the Noctua A4x20 20mm tall fan. This duct works well if the printer has the…
I made this remix to use Ruthex heat inserts, M3 for Rambo and Cover, M2,5 for RPi. The cover is redesigned to use Socket screws instead of Flat heads. You should use all the additional parts from the original. I didn't printed the parts…
I have my mk3s+ in a housing, so i needed a quick solution to cool the Einsy Rambo board. you need a 40x10mm 24V fan and four 10mm M3 bolds. Also you need a M4 12mm bold and a M4 Tnut to connect the Print to the Aluminium extrusion. Just…
If you plan to build custom Prusa MK3 with thick steel frame you can use this part to hold Einsy box in place on frame with zipties. Feel free to remix for various thicknesses. The tabs on bottom are not really useful but the top one is…
This is a remix of the original el. box cover MK4s , adapted for a MK3S+ build installed into an MK4 frame . 💡 Key idea: Reuse the unused blower fan left after MK4 → MK4S upgrade to provide active cooling for the Einsy rambo board inside…
Well, again one of the elements I did print for my NFS Carbon themed bodykit. Filaments used : - ROSA3D PET-G Standard 1,75mm Neon Green Glow in the Dark, UV Glow - ROSA3D Starter Glitter Graphite - Fiberlogy EASY PETG White Graphics : -…
I remixed those 2 models from @Verbs and @HeineSrensen to have a stronger support of the extruder cables to avoid them touching the plate. I took the inspiration using the following model…
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
Modified the original electronics box to include two 4020 fans to actively cool the Einsy Rambo and PI Zero.
Introduction I wanted a control box that met the following criteria, and couldn't find one, so decided to make my own: Fits both the Einsy RAMBo and a Raspberry Pi. Case fans to prolong the life of the enclosed electronics. All parts fit…
This is for 40mm fan mounted at Einsy's door, blow directly to PCB. The column is sized for Noctua NF-A4x10 40mm fan (hole spacing 32mm). If you use different fan, you might need to adjust the column slightly. I use NF-A4x10 fan at 5V,…
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. ------------------------------------…
Enhanced RPI zero W frame. For projects with GPIO. Print instructions Category: 3D Printer Accessories
I used KalleKnall's design to modify it to include active cooling. I removed the area of the Raspberry because I have my Raspberry outside the print enclosure. I use 2 fans, the upper one blows the air onto the Einsy board and the lower…
DEUTSCH: Heute habe ich mir das Einsy-Gehäuse des MK3/s vorgenommen um es mit einer Wabenstruktur zu versehen damit es besser zum rest passt. Die Optik ist angelehnt an das PSU-Cover von "mariusvw"…
I use this Einsy RAMBo case to mount the board outside the heated enclosure. This keeps the temperatures of the chipset as low as possible. Requires some M3 hardware for mounting. Can be printed without support material. Fits on the build…
During really hot days I had some issues with my Raspberry PI Zero W overheating. So I added a 30mm fan to keep temperature of the Raspberry PI and the electronics down. I used one of the 24V fans that came with one of my E3D V6. Print…
Simple , pratique , efficace, aéré , léger, avec porte, et plusieurs fixations pour bien ranger les câbles . Impression sans support , tout y est . Et aussi un petit trou pour bloquer l'écrou en T afin de fixer la vis. Il vous suffit de…
Prusa MK3S electronic box for: Original Einsy Rambo Board Raspberry Pi 4 2,5 inch HDD 2x DC/DC convertor (24V to 5V and 24V to 12V) 9x Optoisolated MOSFET switch for vent controll, LED strip, Print head light (second dc/dc and 6x MOSFET…
Is the Big Einsy Case still not Big enough? struggling to fit some additional goodies in there! Introducing the Phat Einsy Case! This is as big as it can possibly go! You phsyically cannot print a bigger case using the prusa I3. There is…
MK3S+-Einsy-base-M3-heat-set-inserts_rev2 - for MK3S family without cutout for RPi MK3S+-Einsy-base-RPi-M3-heat-set-inserts_rev2 - for MK3S family with cutout for RPi BEAR-Einsy-base-M3-heat-set-inserts_rev2 - for BEAR Upgrade without…
This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…
This a replacement for the original ventilation grid to protect the Einsy motherboard from dust. You can install it even if you have the original grid installed to the inside or outside. You don't have to remove the original grid. Because…
I'm using Pi Zero 2 W with a flipped case but i realized that Pi gets hot inside the enclosure. This duct will provide air circulation around the Einsy board and the Pi. I printed using PLA. PETG works too. 0.2mm Layer Height 15% Density…
This is just a remix of the big einsy case but with the cutout for a raspberry pi zero 2. You can use the stock cover.
Pro všechny, komu se při sestavování jednotky MMU2S odštípne více materiálu z dvířek u desky EINSY než by chtěl, dávám k dispozici tento remix originálního dílu R1 od i3 MK3S+. Můj průměr svazku kabelů od MMU je 7mm . Jestli už máte MMU…
This replacement piece adds cable bundle attach points where they were on the EInsy board enclosure, which are needed when you move the EInsy board out of the enclosure. For use in heated enclosures print this in PC or ABS if you must,…
This piece allows for mounting the Einsy board of the Prusa i3 Mk3s to somewhere other than the frame. I use it to mount the board on the belly of the Prusa enclosure v2. Moving the electronics out of the hot box should in theory increase…
I am modifying the Prusa Printer Enclosure V2 – with MMU2S support with active heating. As a precaution I am moving the Ensy board out of the enclosure and mounting it to the bottom of the enclosure. This piece is to cover the edges and…
There are a wide variety of remixes and custom Einsy cases (including my own ) available… so why do we need another? I've looked in detail at a few different designs, and learned from my mistakes: Having an enclosure that opens outward…
This is a remix of https://www.thingiverse.com/thing:4192895 which in turn is a remix of https://www.printables.com/it/prints/1802-embiggened-braced-reversed-prusa-mk3-einsy-enclosu I removed “Prusa Research” logo and created bigger…
Modified Einsy base with precise cutouts for 4x little 9x9mm stepper driver heatsinks such as these . Compatible with the MK3/MK3S/Bear upgrade. The grating on the back has been modified and doesn't include the cuts for the Zero like the…
This is a remix of the cover for a fully open fan hole for the most efficiency from your fan. printing instructions are the same as the original
EDIT: v2 has been added, as the first iteration did not completely accomodate the side for the backend of the Mocro USB panel mount extension as it stuck in the case, the one mounting post for the Pi 3B+ collided with it. v2 addresses…
13.12.2019 UPDATE: Door issues Fixed! But still WIP now... BASIC INFO *Multicolor Einsy box without the need to have MMU . You can design your own box & doors patterns or make them changeable... (You do not need to glue it!) ASSEMBLY TIPS…
Remix of the Big Einsy Case for Bear Upgrade by Rkimmell73, This will fit the older Bear 2.0 frame with MK2, MK2.5, MK2.5S printers. The MK2 frame is shorter then the MK3 frame and Bear 2.1 universal frame so the case needed to be…
Even cables that are supposed to be fastened securely will loosen and become slack before you know it. If the cable is slack, it may rub against the print bed or the printed object, causing trouble. This cable cover keeps the cables high…
Made this remix to pull the pieces I wanted from multiple other remixes. Takes the Einsy with Inserts and vertical exit, adds the vent indent and covered holes from the usability mods remix. Adds Holes for MMU and LCD plugs from Plug and…
Summary This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the stock MK3(S) frame. Supports connecting Pi via USB or GPIO. Supports wiring for MMU2. BEAR frame version:…
I wanted to be able to use a Raspberry Pi Camera with Octoprint for remote monitoring of my printer using this mount , however the longest compatible FCC cable I could find for the Pi Cam and Raspberry Pi Zero was 30 cm. This is not long…
[04/30/2020] I have completed assembly of this on my bear frame. As a result I've made a few modifications to the files to allow for better wire feeds and easier access to one of the screws. Installation is still not trivial and I found…
Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…
Fan shroud for the Big Einsy case that hides the brown Noctua a4x10 fan and matches the case aesthetic. It also helps to protect the fan from debris that can cause damage. The fan should install into the shroud with a light press fit, i…
A remix of the Big Einsy Case with the MMU2S cable. It has a much larger slot for the insertion of the mmu2s cables. It requires support enforces for the slot. This makes it possible to get the cables for the mk2.5s in place. I made it so…
Hate seeing cables bent =/ Just a simple print to support the USB B cable connected to the printer from the computer. I used one of the spare M3 screws that came with the printer. Using PLA instead of PETG will probably work just fine too.
I created a bigger and reversed einsy case for better cable management and airflow Fits on Prusa MK3 Prusa MK3s Prusa MK3s+ To assemble everything you need: 6x M3 Square nuts (4x Cover and 2x Cablecover 1 and 2 ) 4x M3 nuts (Einsyboard )…
This is a Einsy case for the Prusa Bear MK3/S. It's a remix of Juan Puchol's great work. https://www.thingiverse.com/thing:3901001 with some inspiration from a remix shown on the Bear FB group. (I'd give credit for that but I can't find…
This is an extension to the standard Einsy-base.stl model from the i3 MK3S+ Printable Parts made to accommodate a Raspberry Pi4. This model was printed with Prusament PETG Jet Black . Please be aware that this model provides a few fairly…
![[MK3S+] Big Einsy enclosure with RPi3/4](https://media.printables.com/media/prints/162987/images/1515455_d1f4131e-ef27-4cd4-9214-131583abd563/enclosure-kpl.jpg)
