1 / 5
(Updated) Einsy door with fan for motherboard cooling — image 1
1 / 5

(Updated) Einsy door with fan for motherboard cooling

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified Einsy electronics door to fit a cooling fan for enclosed printers.

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
131
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

I have an old MK3S+ that I have in an enclosure, which I have modified to have active heating (Active heater mount for Original Prusa Enclosure by Scotsguard | Download free STL model | Printables.com) which maintains 50°C in the chamber, so I wanted to make sure that the electronics didn't get too hot. To do this, I modified the standard Einsy door (i3 MK3S+ printable parts by Prusa Research | Download free STL model | Printables.com) to be able to fit a 40x10mm cooling fan. 

I used an old Ender 3 hotend fan that I had spare, but I'd assume the fitment would be the same for most 40x10mm fans. The fan fits on the inside of the door to avoid any clashes with the hotend/extruder assembly, and is screwed into place using some of the spare M3 fasteners from the kit, directly into the plastic. There are holes for 4 screws, but I only used 2 where there was clearance behind the fan. For the fan wiring, I added a normally open thermal switch which closes at 40°C to control the fan operation and connected this to the power supply. For the moment, I have the thermal switch on top of the Einsy electronics box and it works fine. In the future I might look to tidy this up a bit.

(Update - I've added 2 more versions of this, which use clips to hold the fan in place instead of screws. One has the same cutout style from the original design and the other has a newer hex cutout pattern.)

As with all electronics, please check your wiring before turning it on and any modifications are at your own risk!

I printed this in ASA to cope with the heat, but it would probably be fine in PETG. 0.4 nozzle with 3 walls and 20% infill.  

Tags