Prusa MK3S Einsy Rambo Raspberry PI 4 with 2,5" SSD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa MK3S electronic box for: Original Einsy Rambo Board Raspberry Pi 4 2,5 inch HDD 2x DC/DC convertor (24V to 5V…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 1
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa MK3S electronic box for:
- Original Einsy Rambo Board
- Raspberry Pi 4
- 2,5 inch HDD
- 2x DC/DC convertor (24V to 5V and 24V to 12V)
- 9x Optoisolated MOSFET switch for vent controll, LED strip, Print head light
(second dc/dc and 6x MOSFET module placed on first holder, 3x MOSFET module on second holder)
- Housings for dupont connectors for external connections
On raspbery PI 4 the SD card is used for boot partition only, all other is on SSD, connected via USB/SATA converter
8 pins used for Waveshare touch display (+5V, +3,3V, GND, TP_SI, TP_SO, TP_CS, TP_IRQ, TP_SCK)
1x hdmi output dtto
9 GPIO pins used for output to MOSFETs (GPIO 18 for Gcode SuperLaserController plugin for octopi, GPIO 5 for vent - controlled by PID, temperature reads from processor, GPIO 6,12,13,19 - Led strip R,G,B,W, GPIO 16,26 - Print head light ring (digital led, the white only I don't found), GPIO 20 - enclosure vent
GPIO 21 - input from Humidity and temperature sensor (enclosure)
Pins for Einsy Rambo comm. (header J19) GPIO 14,15 (J19/6,8) - rxi, txi, GPIO 22 (J19/13) reset printer, GPIO 23(J19/14) - power loss signal
CSI - camera
USB - second camera for print head
USB - Sata converter
Custom support for box and cover included, import to slicer as support.
BOM:
USB to SATA - http://s.click.aliexpress.com/e/doQTUxhq type.04
FAN - http://s.click.aliexpress.com/e/s5JVuVVI
DC/DC converter - http://s.click.aliexpress.com/e/tsSxhIWy
MOSFET module - http://s.click.aliexpress.com/e/dpUb9Vuc
Nylon screws and nuts - http://s.click.aliexpress.com/e/OcDgXSxI
Additional fuse - http://s.click.aliexpress.com/e/KSbx5EBA medium size
Wire connectors (or Wago 221 from local shop) - http://s.click.aliexpress.com/e/m9R2rLqY
Led strip for enclosure light - http://s.click.aliexpress.com/e/B5N7EI3Q
LED ring for print head light - http://s.click.aliexpress.com/e/DPBPl6XA
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Filament: PM (Plasty Mladeč) PETG Post-Printing =============
If want use DC/DC converter located on Raspberry holder then assembly it with NON metal only M2,5 screws.
Category: 3D Printer Parts