Case for Raspberry Pi 4 + Geekworm P165-A Heatsink/Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the raspberry pi 4b + Geekworm heatsink & fan
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 1
- Views
- 621
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for a raspberry pi 4b + the Geekworm heatsink/fan without the screen or the pi cam mount per the original model. I also included a remix of Malolo's vertical stand to fit this slightly wider case.
RPI_4_Case_B is the remix. RPI_4_Case_A is included again here for convenience.
I used the M2.5x12mm screws included with the Geekworm heatsink to attach the pi to RPI_4_Case_A. Then I used M3x20mm SHCS to attach A to B. The M3x20 SHCS were pretty hard to get in. Don't use this case if you need frequent access to the pi.
Same license as the original models.
Material: PLA