Counting matching models…
This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…
All the credit to the original designer (and for providing step files). I wanted a VESA mount for the back of my monitor and I was able to build off of Frogree 's design that also supports the Geekworm X1001 Pcie M.2 NVMe adaptor. Enjoy!…
Higher case to fit Geekworm X1001 NVMe Hat I guess it can fit other hats too given they're similar in hight to the NVMe hat.
I'm not a 3D Model designer but I really want a case for my Pi 5 which also uses Geekworm X1002 HAT with an NVME SSD. So I remixed the case model by @pyrho as I really like it and made it fit the Pi 5 with the bottom NVME HAT. I also…
From the original creator: This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch. The case…
I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…
I needed a case to assemble my Raspberry Pi 4 with the cooling solution from GeekWorm (P165-A) and a DSI screen from Osoyoo (3.53). The designed is composed by 2 part that are assemble together with 4 M3x20 screws. Instead of using the…
All the parts you need for the Prusa MK4 and Raspberry Pi Camera Module Version 3. As with the original, the bracket (the piece holding the arm to one of the Z-mounts) requires one M3 x 16 mm cap screw. The Raspberry Pi 4 mount I chose…
Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (…
This is a bracket for mounting the Geekworm Raspberry Pi 4 Armor Case on the din rail in a Voron printer. The case provides improved cooling of the Pi 4 without additional fans. It keeps the Raspberry Pi temperature at about 35 C with a…
A case for a PiKVM V2 (with functional audio). Parts list: Raspberry Pi 4 (any will do, I used 1GB) A power supply for the Pi, be smart, if this is running 24/7 be sure to get a supply that wont get too hot. Some female to female dupont…
Ich habe es in PLA mit 5 Wandlinien und einem Infill von 25% gedruckt, da ich es etwas stabiler mag. Das Gehäuse wird von der Seite eingeschoben und durch das USB-C Kabel gegen das herausrutschen gesichert.
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the…
Requirements: 4 18.6mm Length, 6mm M2.5 Threaded Standoffs, M-F for bottom threads 4 20mm M2.5 Screws as top screws. 4 M.2 HAT + / AI KIT/ AI HAT +/ SSD KIT official included plastic Threaded Standoffs. 4 14 mm M2.5 (can be longer) Screw…
This is a complete case for the Geekworm PiKVM-A4 that includes the CSI, ATX and OLED modules. The top of the case is press fit onto the bottom half. You'll also notice there is a rise for 2 of the standoffs due to the manufacturer…
I designed a custom case for the Geekworm KVM-A4 V2.0 Kit PiKVM because the available options online didn't meet my needs. Features of this case include: Properly positioned and sized connector cutouts Inset micro SD card slot for easy…
This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board). There are two versions - a standalone case and another that can be attached to a UK power socket to…
Rack-mount bracket for the Geekworm P388 Raspberry Pi 4 case. Probably also works with other cases that have a similar footprint, like the P173 (Pi 4) and P252 (Pi 3), but I haven't tested. Note that these cases have their two right-side…
Kann mit PLA oder PET gedruckt werden. Kein Support nötig. Schraubenlöcher für M3 Zylinderkopfschrauben. Beim Mini idealerweise Nutensteine im 3030 Profil.
Vertical stand for the Ugeek/Geekworm Raspberry Pi 3 A+ aluminium case as often used by users of the mt32-pi MiSTer FPGA accessory. Designed to fit this model of case perfectly and be very stable. 0.10mm "detail" print profile and PLA…
Use 2.5x8mm screws. Enjoy!
This is a case for a raspberry pi 4b + the Geekworm heatsink/fan without the screen or the pi cam mount per the original model. I also included a remix of Malolo's vertical stand to fit this slightly wider case. RPI_4_Case_B is the remix.…
Raspberry PI 5 Case that fits the Geekworm NVME X1002 and the GeekPi Active Cooler.
Snap fit case for pi5 with geekworm x1002 buttom and VESA mount.
Simple wall mount for passive aluminum cases for the Raspberry Pi sold under various names (Miuzei, Geekworm, iUniker, etc.) Attention: check the height of your case, my versions for a Pi 3B+ and Pi 4 were slightly different, uploads are…
A case I designed for my HomeAutomation server based on Raspberry Pi 3B. The case is for: Raspberry Pi 3B Geekworm x820 Storage board v3.0: https://wiki.geekworm.com/X820 Geekworm x735 Power Management shield v3.0:…
It is not necessarily only for Voron, you can just use it to mount the Raspberry Pi 4 to any DIN rail. Geekworm armor case Purpose: The armor case and other cooling solutions for the Raspberry Pi have their screws mounted from the bottom.…
(this is my first published model, be gentle :D) This custom 3D-printed case is designed specifically for the Raspberry Pi 5 with the Geekworm X1011 NVMe HAT . It ensures proper airflow, easy access to ports, and a secure fit for your…
Print Settings Printer brand: Bambulabs Printer: Bambu P1P Rafts: No Supports: Not needed, but for port holes (USB & Eth) painted supports makes them nicer. Resolution: Nozzle 0.40mm / Layer Height 0.20mm Infill: Gyroid 33% Filament…
The fit for the board is manageably tight, which disables the board from vibrating due to the hard drive spinning. There are tiny conical offsets at the bottom lined up with the four screw feet on the board, which further disable any…
I wanted to add my PiKVM to my homelab server rack to easily remote control my servers when SSH is not available. I searched for a solution and found this project: Geekworm PiKVM with POE 2HU Mount I liked the idea of printing modules and…
This is just a remix. A Case for a Raspberry Pi 5 and the Geekworm X1011 SSD PCB
This enclosure was designed to fit the Geekworm X302 DAC board for the Raspberry Pi Zero W / Zero 2 W. I dimensioned the internal space using the Geekworm PCB drawing found here with a +.2mm tolerance on all 4 sides. For my board, it was…
Same Case, but with a base to stand it upright and it will not turn off or on!
Simple minimalistic Wallmount for the Raspberry Pi5 Case from JetSteam. Tried to keep the Design close to the original one. Best mounted with 3mm Wood Screws at your needed length. Distance Pieces from the Wall Mount are optional but…
Updated version: More space for the included screws. Cutout for the protrusions of the Raspberry Pi board.
A case which can fit Raspberry Pi 5, RCNUN DC converter and Geekworm X1001 NVMe hat. Snug-type support is required on the DC converter shelf and recommended on the vertical grill and port openings. I've designed this for passive PoE…
I bought the Geekworm X301 expasion board for my Raspberry Pi Zero 2W, and since there is no enclosure available, I used some CAD magic and came up with this. There is room for the C296 heatsink and a 4010 fan. I use a Noctua NF-A4x10 5V.…
If you run several Raspberries (I run 3: Home assistant, WordPress, Dashboard) you need to store them somewhere. I decided to wall mount them under my desk. The result is a simple wall mount that fits this case:…
BE VERY CAREFUL WITH THE POWER BUTTON WHEN INSERTING THIS INTO THE CASE! uses 4 screws: M 2.5 x 6 https://www.sparkfun.com/sparkfun-micro-oled-breakout-qwiic-lcd-22495.html I removed the the thicker double sided tape from the oled and…
This is a bracket for mounting the Geekworm P252 Raspberry Pi 3B+ case to a wall or other surface. Has two M3.5 size (#6 standard) mounting holes spaced at 40 mm center to center distance. I printed it with 0.3 mm layer height at 100%…
Made a case to fit a raspberry pi zero or zero 2 with the geekworm heatsink . Its a tool less snap together case that should work with any heatsink less than 10mm high. If using the heatsink, place the 2.5 nuts in the captive slots on the…
A pretty simple case to hold the Geekworm X635 board. Fits perfectly with the C235 heatsink. Since things can get pretty warm there's no top, but the board sits nice and snug with peripherals plugged in. I'm using this with a PiKVM…
A mount designed for the compact aluminum RPI4B case by Geekworm. This setup looks great and cools very well! This is a remix of PjotrStrog's design, intended to mount on the aluminium rails of the Prusa Mini (using t-slot nuts and 5mm…
An extension of: 19" 1U Rack with Moduler trays for Raspberry Pis from @Robert_28442 First of all, thanks for this amazing project. I'm now sharing a little contribution, after noticing that the basic tray was incompatible with the…
I needed a case for my x630 circuit board in my Pi-KVM project so I made one in fusion 360 :)
I shortened the standoff legs to accommodate Geekworm Pi Zero 2 W heatsink. Model C239 4mm cut down on legs.
Hardware I used: Geekworm PiKVM POE Hat DAP 2 HU Bezel USB right angle adapter 2,5mm brass distance hexnuts
This is a stand for Geekworm LVDS to HDMI adapter board. It uses the 4 mounting screws on the board as support columns. The columns have an M3 thread allowing you to secure them with a nut. The bottom of the stand is labelled for…
This is a simple stand to bind a 92mm fan to two raspberry pis in Geekworm cases. It requires no supports to print. Needs 2-4 m4 nuts and bolts, and 3mm rubber feet as spacers for the pis.
used on https://www.thingiverse.com/thing:4354970, but should fit up/downstream remixes. Bracket simply push-fits into the existing hex holes and can be orientated across any 3 adjacent hex's. requires 2x 6x2mm magnets per bracket. I used…
You will need some longer stand-offs. If I were going to rework this, I'd add built-in stand-offs but I was in a rush to get this made. A PoE shield with fan does fit in this and will power the X876 with no problems.
Lid tolerance is about 0.1mm. I've printed using creality k1 and it is working ok. Display cover has to be glued. Apply glue only to outside area. I've printed from ABS and used acetone to glue cover.
To cool down my RaspPi with Octoprint I use this Heatsink + Fan . Works fine so far, but after a half year the fan got louder then the rest of the whole printer environment. From another not finished project I had the 40x40 Noctua Fan on…
Geekworm Heavy Duty Aluminum case for RPi4 Bottom Part replacement
All around enclosure for the Geekworm X-UPS1, a UPS for Raspberry Pi/other 5/12V based devices (like the Zimaboard). For anyone who's not so happy with the top/bottom only acrylic covers included with the device.
I'm ocd, wanted this cable to lay neatly without crimping it and possibly damaging it. The geeekpi & geekworm fin dimensions differ. I found the fin distances to be pretty inconsistent, even on the same case, so.. I included both versions…
Original M2,5 screws from the P580 case are too short (2.5x4mm). M2,5 6mm screws will fit.ph
This case adapts Pwnagotchi Super V19 to fit the Slimagotchi hardware mod, which makes the Pwnagotchi hardware smaller. It is designed for a Raspberry Pi Zero 2 W, Geekworm X306 V1.5 and Waveshare 2.13-inch V4 display. Files Print one…
Keep your workspace clean with this under-desk mounting solution specifically designed for Raspberry Pi units in Geekworm cases . Ideal for Home Assistant users or hobbyists running a 24/7 server. Since the design cannot be printed as one…
geekworm pikvm with bliswitch at the back
All around enclosure for the Geekworm X-UPS1, a UPS for Raspberry Pi/other 5/12V based devices (like the Zimaboard). For anyone who's not so happy with the top/bottom only acrylic covers included with the device.
A case for a PiKVM V2 (with functional audio). Parts list: Raspberry Pi 4 (any will do, I used 1GB) A power supply for the Pi, be smart, if this is running 24/7 be sure to get a supply that wont get too hot. Some female to female dupont…
