1 / 2
Raspberry Pi5 + DC converter + Geekworm X1001 NVMe SSD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case which can fit Raspberry Pi 5, RCNUN DC converter and Geekworm X1001 NVMe hat.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 1
- Views
- 1,035
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A case which can fit Raspberry Pi 5, RCNUN DC converter and Geekworm X1001 NVMe hat. Snug-type support is required on the DC converter shelf and recommended on the vertical grill and port openings.
I've designed this for passive PoE usage, supported voltage range from 10 to 80 volts with RCNUN converter. It can optionally be attached to a wall using keyhole slots.
Rendered 3MF file with suggested supports is attached. In case you need the original OpenSCAD files (requires BOSL2):
Blog post about the project (in Finnish)
Extra BOM
- 4 × Screw M3x20 FHCS, self-tapping
- 2 × Zip tie 1 mm
- 2 × Screw M3 FHCS for keyhole slots (optional)