1 / 5
Fan adapter for RaspPi Geekworm Embedded Heatsink with Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
40x40 Noctua Fan Adapter for RaspPi Geekworm Embedded Heatsink
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To cool down my RaspPi with Octoprint I use this Heatsink + Fan. Works fine so far, but after a half year the fan got louder then the rest of the whole printer environment. From another not finished project I had the 40x40 Noctua Fan on my side which I wanted to install. Here is the necessary adapter.
Maybe working also on other Heatsinks, because RaspPi holes are used for installation.
BOM:
- Printed Adapter (I used PETG)
- 4x countersunk-head screws, M3 x 16 mm
- 4x Nuts M3
- 3x Screws of the old fan which are a little longer than the screws which are originally needed to fix the Heatsink on the PI.