1 / 13
Raspberry Pi 4 SnapFit Case Geekworm X857 SSD Board — image 1
1 / 13

Raspberry Pi 4 SnapFit Case Geekworm X857 SSD Board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board

Rating
5 / 5
Likes
14
Downloads
111
Makes
2
Views
1,259
Reviews
2

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board).

There are two versions - a standalone case and another that can be attached to a UK power socket to keep the Pi tidy and out of the way, rather than having it on the floor.

I use it as my main Zigbee2mqtt coordinator that acts as a hub for 80+ Zigbee devices that in turn connects to my Home Assistant automation software.

As an added bonus, I designed an antenna extender to help reduce interference from the Pi and SSD electronics, secured with small zip-ties.

I designed it to mount above the socket because sometimes they can be quite close to the floor, plus I wanted my zigbee2mqtt module be as high as possible to help with the Zigbee range.

The Top cover snaps into place so no screws are required.

Zigbee2mqtt - https://www.zigbee2mqtt.io
Home Assistant - https://www.home-assistant.io
X857 V2.0 mSATA SSD Storage Expansion Board - https://www.aliexpress.com/item/4000051492209.html

All printed using PLA with 0.2mm layer height.

I have included the model STEP files so that you can easily modify the model for your own needs.

Category: Hobby

Tags