Raspberry Pi 4 SnapFit Case Geekworm X857 SSD Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 1259
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board).
There are two versions - a standalone case and another that can be attached to a UK power socket to keep the Pi tidy and out of the way, rather than having it on the floor.
I use it as my main Zigbee2mqtt coordinator that acts as a hub for 80+ Zigbee devices that in turn connects to my Home Assistant automation software.
As an added bonus, I designed an antenna extender to help reduce interference from the Pi and SSD electronics, secured with small zip-ties.
I designed it to mount above the socket because sometimes they can be quite close to the floor, plus I wanted my zigbee2mqtt module be as high as possible to help with the Zigbee range.
The Top cover snaps into place so no screws are required.
Zigbee2mqtt - https://www.zigbee2mqtt.io
Home Assistant - https://www.home-assistant.io
X857 V2.0 mSATA SSD Storage Expansion Board - https://www.aliexpress.com/item/4000051492209.html
All printed using PLA with 0.2mm layer height.
I have included the model STEP files so that you can easily modify the model for your own needs.
Category: Hobby