1 / 3
Raspberry Pi Zero Case For Geekworm Heatsink
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple pi zero or pi zero 2 case designed specifically for the geekworm full coverage aluminum heatsink.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Made a case to fit a raspberry pi zero or zero 2 with the geekworm heatsink. Its a tool less snap together case that should work with any heatsink less than 10mm high.
If using the heatsink, place the 2.5 nuts in the captive slots on the bottom, put the pi on top, dont forget your thermal pads, and then screw the heatsink to the nuts! While tightening the nuts it will also friction lock the pi in place. Then simply snap the cover on top!
Can be printed with no supports