1 / 3
Geekworm P252 Raspberry Pi Case Mounting Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket for mounting the Geekworm P252 Raspberry Pi 3B+ case to a wall or other surface.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a bracket for mounting the Geekworm P252 Raspberry Pi 3B+ case to a wall or other surface.
Has two M3.5 size (#6 standard) mounting holes spaced at 40 mm center to center distance.
I printed it with 0.3 mm layer height at 100% infill with PLA and it is surprisingly durable.
The "no-fingers" variant has the small fingers that touch the top surface of the case removed; this should allow the mount to work on cases which have a flat top surface (as opposed to heatsink ridges).