Geekworm X1500 CM5 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Geekworm X1500 CM5
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 1
- Views
- 131
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BE VERY CAREFUL WITH THE POWER BUTTON WHEN INSERTING THIS INTO THE CASE!
uses 4 screws: M 2.5 x 6
https://www.sparkfun.com/sparkfun-micro-oled-breakout-qwiic-lcd-22495.html
I removed the the thicker double sided tape from the oled and used a thinner piece of double sided scotch tape.
https://www.adafruit.com/product/4397
You'll need to insert the IO ports into the back first at an angle.
For the camera lid
camera uses 4 screws: M 2 x 6
accelerometer uses 2 screws: M 2.5 x 6
https://www.adafruit.com/product/2809
You'll have to snake a FPC cable around. I used this one since it's more flexible:
https://www.adafruit.com/product/3157
The camera is in a weird spot but it's the only place I could fit it without changing the case. You can use the accelerometer to detect how to transform the camera image or rotate the display when you place the case on it's edge.