Radxa Rock Pi 4B+ Heatsink Case for Embedded Computers' Heatsink.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Radxa Rock Pi 4B+ Heatsink from Embedded Computers. Heatsink is not a standard one, requires custom case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Case for Radxa Rock Pi 4B+ Heatsink from Embedded Computers.
This heatsink is non-standard and therefore I could not find a case for it. Therefore, I made my own.
Embedded Computers sells a case for it but I felt it was kinda expensive over the heatsink only, especially for a 3D printed part. They also don't provide a model for it.
This case has 2 mounting methods. You can use the countersunk M3 screws in the heatsink to go into the self-tapped holes in the case, or use SHCS M2.5 screws to secure into the standoffs used to secure the Radxa Rock Pi 4B+ to the heatsink.
Does not include hole for MicroSD card slot as this SBC has intergrated EMMC. Also no antenna hole so plug in a uFL antenna before closing the case.
Print in provided orientation, no supports or overhangs. Fusion file included if you want to modify it.