Radxa ROCK 4C+ Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here you find two cases for the ROCK 4C+ : One for the card alone, the second for the card and official heatsink S2Pi
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here you find two cases for the RADXA ROCK 4C+ :
One for the card alone (files ROCK_4C+_case.3mf and ROCK_4C+_case.stl) ,
the second for the card and official heatsink S2Pi (ROCK_4C+_heatsink_case.3mf, ROCK_4C+_heatsink_case.stl)
To mount the card alone (ROCK_4C+_case), you will need M3 x 8 mm screws and four M3 x 5 x 4.2 mm brass insert nuts.
To mount the card with its cooling system (ROCK_4C+_heatsink_case) in the mounting box, you will need two M2.5 x 12 mm screws, two M3 x 5 x 4.2 mm brass insert nuts, and two M3 x 8 mm screws.
Note: To use a 40-pin GPIO cable like this one
with the cooling system, you will need to insert a male female connector of this type
across the 40 pins of the board in order to mount the cooling system.