Cannagar, Thai-Stick, Blunt Rolling Tool (4 sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
easy to print, works perfectly. (added new clip for better tolerance !! )
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 1183
- Wydruki
- 2
- Wyświetlenia
- 4037
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
If you like what I do here, come visit my (German) Discord or my Facebook group.
Discord: MX-creations
Facebook: 3D printed Grow Tools & Accesories - free .stl
changelog:
(19.07.2025)
- added (XS_S_M_L)_CLIP_v1.1 with more tolerance
You need:
- 2x M3x18mm screw
- 3mm bamboo stick
no screws ? u can use the wooden or printed stick instead ;) !
Print settings:
- PET (so u can clean it with IPA)
- 0,4 nozzle
- 0,2-0,25 layer height
- 15% grid
- 2 perimeter
Choose your option !
Size: | Capacity: | Paper Size: | Diameter: | Max Length: | How To Use: |
L | 10-14g | King Size (3) | 16,5mm | 107mm | Party |
M | 3,5-7g | 1-1/4th Size (2) | 12,3mm | 70mm | In a group |
S | 2-4g | King Size (1) | 9,8mm | 94mm | With a buddy |
XS | 1g | 1-1/4th Size (1) | 7,9mm | 67,5mm | Solo |
Assembly:
- crack BODY.stl
- screw in the screws (tighten them, then loosen them a bit)- attach CLIP.stl (its hard to attach it, push the BODY.stl with the CLIP.stl (in front) aiganst a wall, works fine for me)
- EDIT: ^^its very easy if u push the clip from the middle to the outside... ;)
- IMPORTANT ! the detent nose inside of CLIP.stl must be aligned to the middle of BODY.stl
I hope you will enjoy it & stay green !