Cannagar, Thai-Stick, Blunt Rolling Tool (4 sizes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
easy to print, works perfectly. (added new clip for better tolerance !! )
- Rating
- 5 / 5
- Likes
- 122
- Downloads
- 1,183
- Makes
- 2
- Views
- 4,037
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
If you like what I do here, come visit my (German) Discord or my Facebook group.
Discord: MX-creations
Facebook: 3D printed Grow Tools & Accesories - free .stl
changelog:
(19.07.2025)
- added (XS_S_M_L)_CLIP_v1.1 with more tolerance
You need:
- 2x M3x18mm screw
- 3mm bamboo stick
no screws ? u can use the wooden or printed stick instead ;) !
Print settings:
- PET (so u can clean it with IPA)
- 0,4 nozzle
- 0,2-0,25 layer height
- 15% grid
- 2 perimeter
Choose your option !
Size: | Capacity: | Paper Size: | Diameter: | Max Length: | How To Use: |
L | 10-14g | King Size (3) | 16,5mm | 107mm | Party |
M | 3,5-7g | 1-1/4th Size (2) | 12,3mm | 70mm | In a group |
S | 2-4g | King Size (1) | 9,8mm | 94mm | With a buddy |
XS | 1g | 1-1/4th Size (1) | 7,9mm | 67,5mm | Solo |
Assembly:
- crack BODY.stl
- screw in the screws (tighten them, then loosen them a bit)- attach CLIP.stl (its hard to attach it, push the BODY.stl with the CLIP.stl (in front) aiganst a wall, works fine for me)
- EDIT: ^^its very easy if u push the clip from the middle to the outside... ;)
- IMPORTANT ! the detent nose inside of CLIP.stl must be aligned to the middle of BODY.stl
I hope you will enjoy it & stay green !