Counting matching models…
Just as the original Model: Use a simple Piece of 1,75mm Filament as the hinge-pin. Print the Box upright, no support needed. Print the Lid seperately, laying on its biggest surface.
Winter time, cold time. And when you share an herbal cigarette with your friends, unfortunately you don't just share the pleasure. My solution is simply a matching cigarette holder. The opening is designed for the normal king-size cones,…
The source marked this model as adult content.
A cigar ashtray in two dimensions for big and mini cigars. 3 different designs from the same shape to choose what you like to print. Printed in Prusament PETG Galaxy Black. It has no problem printing on PETG if you don't let the cigar…
I used the Mazda Miata cigarette lighter replacement for my Mitsubishi Evo and a DC12V USB Converter to make a USB plug. The USB Converter I used.…
Printed the Model with TPU fits tight in car cigarette lighter slot and vape slides in perfect to grab any time.
TEM ID: BLM-PWR-AAA20500 CLASS: Energy Transmutation Device GENERATION: Post-Steam Revival Mk.I MAKER: Black-Lotos9758 Energy Artifact: “AAA→20500 Converter” ⚙ PURPOSE Energy rebirth. The artifact allows you to use an analogue of 20500…
Cigarette Case RSH-002 (Straight) A straight cigarette case for regular (10 pcs.) and slim (12 pcs.) cigarettes. Each is available in several variations. Updated February 3, 2026 Added a straight cigarette case for regular (12 pcs.) and…
RSH-002 Cigarette Case (Curved) Curved cigarette case for regular (10 pcs.) and slim (12 pcs.) cigarettes. Each is available in several variations. Update from 12/25/2025 I added another type of decor. Updated February 3, 2026 Added a…
eng. I've tried many adapters like this, but none of them worked for me. So I made my own, and it works with thick cigarettes. pl. Testowałem wiele tego typu adapterów, ale żaden mi nie pasował. Zrobiłem więc własny i działa z grubymi…
I designed a joint/cigarette + lighter case for every state! These state-themed designs are variations of something I designed awhile back called the Tokédex. The Tokédex is a clamshell container, print-in-place, no post-print assembly…
This reusable cigarette filter is designed as a two-part capsule system that fits into an existing cigarette holder . The model is intended as an additional accessory and requires the original cigarette holder model to be used properly.…
I wanted a way to display my cigar boxes as art on my walls, I based this off a standard size 8x10x2 20 count box with some additional room to allow boxes to move on shelf and not be tight fits. however can be adjusted in your slicer of…
Need a way to transport your cigar damage-free? Here is a simple design with a screw on lid. The case itself fits up to a 6x52 cigar. The lid has knurling to aid your grip to unscrew the container for quick access.
E-cigarette holder for cup holder Škoda Octavia II Dimensions: 54mm Ø-73mm Ø-69mm 31mm 21mm
Modular Cigarette Case A compact 3D printable cigarette carry case designed to keep your cigarettes/joints protected and organized in your pocket. The case features a modular internal layout with multiple configurations depending on what…
Accessory power outlet/auxiliary power outlet/cigarette lighter socket I couldn't find any existing models that are robust, so I made it instead. This socket uses a hose clamp and some fasteners. It can be used inline, or mounted to some…
When my friend was diagnosed with lung cancer, he had to stop smoking quickly. The chemist provided patches but having nothing in his hand was a big part of the addiction. I created this dummy cigarette as a smoking cessation aid, it…
Mold for casting concrete cigar ashtray I made a second mold with 5mm walls to reduce the size. I also included the mold positive in case you need to make a mold from the original.
Container for a lighter (small bic) and six slim cigarettes. (may be waterproof :))
Bring a warm, retro glow to your desk or shelf with this stylized cigarette lamp. The design is clean and modular—three printed parts around a COB LED strip, powered via USB‑C. The yellow “filter” cap acts as a soft diffuser, while the…
Carry your smokes and lighter wherever you go! The Tokédex conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going, picnicking, you…
Tool for extracting cigarette lighter. PETG recommended, place models for printing like displayed on screenshot. Be aware that tool could be hard to remove from 12v socket if you put it in the socket and don't extract socket from it's…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Designed for efficiency and a slim profile, this dual-compartment sleeve ensures your pack and lighter are always exactly where you need them. Why This Design? This isn't just a protective case; it's a functional holder designed for…
This is version 2 of my printable jar with a cutout in the lid to insert a cheap hygrometer. It is fully printable, including the gasket. No tools are required for assembly. There are two models: one with the cutout and one without. The…
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
A fully 3D printable cigarette roller , including the flexible TPU rolling belt . No extra parts needed — everything can be printed directly on a standard FDM 3D printer. Compatible with 79 mm cigarette papers . The frame and shafts are…
Easy printable without support. Cigarette box case 36 versions 9 sizes in 4 designs for 8 cigarettes sizes Designed for 0,15mm slicing and print. 9 different sizes in 4 versions. Use random seam. Model A…for 10pcs superslim long…
Designed for 0.15mm slicing and print. Version A… for king size cigarettes 84mm long and diameter 8mm Version B… for king size cigarettes 100mm long and diameter 8mm AB1… Cap for boxes Inside box dimensions 62x23.5x85(or101)mm. Seconds…
Design and very well functional box for an 100's cigarette box (58 x 23 x 103 mm). Neodymium magnets 8 x 3 mm are used. The magnets are glued by super glue. The design is made for heavy use and long life. I also made a design for a very…
J'ai crée se tasseur pour mes cigarettes qui font rire attention tout depend du poid que vous voulez moi je le remplis a 20% mais d'autre le trouve trop ou pas assé lourd a vous de voir
took a toothpick dispenser and modified it hold and dispenses cigarettes
Remember to hit LIKE on my design if you download it so I get credit, thanks! Yet another cigar ashtray! Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
Hand rolled cigarette case. it supports one large/thick hand rolled cigarette or up to 2~3 thinner ones. In order to make it water tight, you must add one rubber o-ring seal. the o-ring dimensions i used are 12~13mm in diameter and 2.5mm…
Jedná se o pomůcku pro lidi s omezeným úchopem, kteří rádi kouří cigaretu. Cigarette holder for people with limited grip
If you dont like the ugly pictures on your cigarette box, this box help you. And you always have a coin for a coffee.
It is an adapter to smoke your whole pack of cigarettes at once. Just slide the body over the open pack, then slide the clip in to lock it all in. SHARE WITH FRIENDS AND FAMILY PLEASSSEEE NOT ALONE
This plug is specifically designed for Dodge, Jeep, and Chrysler vehicles using Mopar part number 4793555 (or equivalent). It fits into the dashboard hole left by the removal of the cigarette lighter providing a cleaner look. The plug has…
use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…
This really helped me get rid or a mess on my desk from vape accessories. Let me know if you like it for your setup and post your device base dimensions. I'll make one just for you :-)
A small tool for tamping the end of a homemade cigarette. Made for standard 8mm cigarette tubes. Sometimes after filling a cigarette tube some tobacco pokes out of the end, or the end is loose. This simple tool lets you tamper down the…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
Designed in Fusion 360 Education Edition Made this for my Dad who rolls his own cigs, using tube with filters. After printing a few cases on here I noticed they were all designed for store brand sizes so I made this specific for people…
Inspired by XYZWERKZ's 20 Cigarette Adapter, I raise you the 20 Self-Rolled-Cigs Adapter, with 21 6mm holes: Add your 20 Cigs in the front and inhale more efficiently! (Don't Smoke. It's addictive or something and not good for your health.)
The top and bottom of the cigarette case Lighter compartment Hinge connected by a piece of filament Lock
The top and bottom of the cigarette case Hinge connected by a piece of filament Lock
Keep both halves of the model aligned. Print-in-place (do not separate the pieces). Suggest 0.12mm layer height, 3+ perimeters, 40% infill. Suggest you print solid infill for the first 2mm. You will need 6 x 3mm diameter, 4mm depth round…
3d print ready, no support needed. More on https://cults3d.com/en/users/Horoll/3d-models
20mm Cigar Holder with Plug. Made for owners of the company I work for when they retired. Scale and Personalize to suit your needs.
Cigarette lighter plug cover for Ford Fiesta 2008-2010 with text "Ford".
This print cost me 0.48 and saved me about $59.00 which the USED one on eBay was listed for! A used one would be just as brittle as it would just as old as mine (unless it was new old stock which I could not find). I did make a minor…
I printed this with 0.2mm layer height. The insert may not need support at the shoulder but I printed with supports anyway. I secured the parts together with double sided tape. The phone is held at a 45° angle.
Refer to instructions on original post - https://www.printables.com/model/161671-cigarette-box and like the original while you are there! Stop Smoking!
Fake cigarette props for costumes and cosplays. Based on the original dimension of a regular (74mm) and a long (84mm) cigarette. AMS needed but your can cut my model and glue it if you want.
Your Last Cigarette: Luxury gift container This is the best gift to your loved ones, friend or even yourself This Gift will: Save lots of money Save Time Save medical bills and cost Gives a better sense of smell (at same smell better/not…
Cigarette case I designed with sliding action. Features a nub and groove system to hold in place when closed. Features an inlay that is easily embossed with whatever design you would prefer. I have included some pre-made inlays with the…
Print each piece according to your color choice. add in a color change point in your slicer to achieve multi-color on the Cohiba plate. There are inset spots on the lid and box to properly place the handle and lettering. The humidity…
Ho realizzato questo supporto su richiesta per la sigaretta elettronica kiwi go+ in modo che possa essere posizionata sul tavolo senza ribaltarsi o rotolare via. È progettata per essere stampata in pla o petg. Divertiti e buona stampa! I…
This is a printable Jar with cutouts in the Lid to insert a cheap hygrometer. It also has a place to insert a Hydro-Pack like Boveda to keep the humidity under control. This is modeled to fit a 8g Boveda Pack. It is a little fiddly to get…
A small and convenient case that fits 100mm cigarettes well! I've included the STL files and use variables almost everywhere to make adjusting the sizing as easy as possible if you want a larger or smaller case, or want to add your own…
This is a modular design of a box with airflow to its content to be used in a cigar Humidor to maintain constant humidity
Fits 44-50 (inner clip) or 50-56 (outer clip) ring gauge cigar. And standard Picatinny rail of course. Requires #6-32x1.25 screw and nut.
For the hinges you need 1.4mm thick nails . I've had them lying around, idk how common they are. Mine are 25mm long, thats a bit too long, so i snapped a few mm off. I printed the case with Bambulab PLA-CF, only the hooks are printed from…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I recommend printing the butt bucket out of ABS or ASA or…
A bleed tool for the Ion butane cigar lighter . Printed at 0.12 layer height to preserve the detail of the butane injector press. No supports required
A very simple cigarette holder/box! This is needed to my wife, but I can't find a proper one for her, so i make one... --- It can holds up to 21 piece of death sticks! :) Nice, clear design… No fancy stuffs! --- I make a second cap for…
I got a Lenovo Thinkpad X1. It has a flashing red LED on the lid. I immediately thought of two options... Bender or Terminator. Position the tip of the cigar exactly on top of the LED. ;-) Printed in PLA - the color changes are included…
I optimized a VOLVO cigarette lighter cover for 3D printing without support.
Nabíječka článků 3,7V 550mAh z jednorázových elektronických cigaret pro jejich další využití. Nabíječka má ochranu proti přepětí i zkratu, při nabíjení kontrolka svítí červeně po nabití je modrá. Vhodné třeba na předělání starého…
Lost vipe centaurus electric cigarette case for protection against falling Obudowa na papieros elektroniczny Lost vape centaurus służąca do ochrony
I liked this design, simple and easy to print and use. I added magnet holes, and have them all over my shop stuck to my woodworking tools. So one is always at hand. I find that four magnets is ideal, you can choose how many to use. They…
Impression en PETG avec supports pour surplombs >45°; Remplissage 30%; coque épaisseur mini 2mm; Parois verticales 5. Un petit coup de papier de verre pour quelques imperfections, de la patience… Je joins le fichier F3D pour vos…
Saphe Drive Mini holder for the cigarette lighter in the centre console. Tested for the BMW 1 and 3 Series. May also be compatible with other car models. Should also be compatible with the Saphe Drive Pro. Slides onto the supplied…
I love building cigar box guitars...but have never been able to make a nut I've been happy with. So I figured why not try 3D printing one :) Seems to work better than anything I've managed to carve out of hardwood, bone or plastic by…
cigar mold I made for 3D printing, it has the ring gauge for a robusto, but the length is pretty oversized I haven't thested it yet, and if I do and I change something, I'll delete this or update it, but it has quarter milimeter of error…
Made this to keep the mrs happy, keeps cigarette packets in a neat stack with the open bottom slightly angled to remove packs, two side holders for open packs and lighters.Can be printed with only supports on the open bottom slit.
Print: Tobacco : White Filter : Orange Ash: : Grey or marble grey Additionaly, you can Stick a Red glitter sticker on the end og the ash or Tobacco My orange filament is on its way. as soon as it arrives imm print and upload pictures of…
i was annoyed by the round mouthpiece on volish alpha so i made this one, it doesnt increase overall size of the cig and has the same amount of airflow hope you like it
Currently printing this out, photos to come shortly. Will also be uploading a version without a logo The Olsen Cigar Ashtray is a thoughtfully designed ashtray built to accommodate two cigars simultaneously, offering both style and…
added some text to the molds and separated into individual files and made more sizes
