1 / 1
2" Magnetic Exhaust Pipe Mockup System 15x3mm magnet — zdjęcie 1

2" Magnetic Exhaust Pipe Mockup System 15x3mm magnet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix which changes to 2" outside diameter pipe and 15mm x 3mm magnets with a Y fitting and other angles.

Ocena
0 / 5
Polubienia
17
Pobrania
113
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing.  This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm.  

In the pictures I have a 1" long straight, 3" long straight, and 15deg, 30deg, 45deg, and 90deg sweeps with a radius of 4", 3", 2", and 1.5".  Feel free to reach out if you would like another version of a different diameter or special “Y” or “T” fittings.  I am happy to make new versions of whatever you need!

They are also a very fun toy because they have a very satisfying click and stay together well enough to hold and move around.  They even work well as fridge magnets!

 

If you need a 1.5" (38mm) version, see the original version here: https://www.printables.com/model/462199-magnetic-exhaust-pipe-mockup-system

By request, here is a 1.75" (44.45mm) version for 18mm x 3mm magnets: https://www.printables.com/model/663383-175-magnetic-exhaust-pipe-mockup-system

Other 2" version:
https://www.printables.com/model/678161-2-magnetic-exhaust-pipe-mockup-system

Tagi