1 / 8
Bike flashlight holder (Ledlenser T7.2 or similar) — zdjęcie 1
1 / 8

Bike flashlight holder (Ledlenser T7.2 or similar)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder, so you can attach Ledlenser T7.2 or similar light to your bike and use it as front light.

Ocena
0 / 5
Polubienia
21
Pobrania
79
Wydruki
0
Wyświetlenia
483
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

First I made a version that is held down entirely by velcro strap, but realized that PETG work great even without a strap, so I made a version that can be held together with a glue.

Some might prefer velcro version as it can act as a “clamp”

Check out print orientation and where to apply supports for best outcome.

You also need:

  • 2x M4 nuts
  • 2x M4 x 24mm (or longer) tapered head screws
  • 165mm x 20mm velcro strap (for velcro version only)
  • PVC or other suitable glue is highly recommended (for non-velcro version)
  • Bike (obviously)
  • Ledlenser T7.2 or other light with around 29mm body diameter

My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: Smooth PEI
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: PETG recommended
- supports: as on the picture
- perimeters: 3
- solid layers (top/bottom): 5/4
 

 

 

Tagi