1 / 8
Bike flashlight holder (Ledlenser T7.2 or similar) — image 1
1 / 8

Bike flashlight holder (Ledlenser T7.2 or similar)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder, so you can attach Ledlenser T7.2 or similar light to your bike and use it as front light.

Rating
0 / 5
Likes
21
Downloads
77
Makes
0
Views
476
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

First I made a version that is held down entirely by velcro strap, but realized that PETG work great even without a strap, so I made a version that can be held together with a glue.

Some might prefer velcro version as it can act as a “clamp”

Check out print orientation and where to apply supports for best outcome.

You also need:

  • 2x M4 nuts
  • 2x M4 x 24mm (or longer) tapered head screws
  • 165mm x 20mm velcro strap (for velcro version only)
  • PVC or other suitable glue is highly recommended (for non-velcro version)
  • Bike (obviously)
  • Ledlenser T7.2 or other light with around 29mm body diameter

My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: Smooth PEI
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: PETG recommended
- supports: as on the picture
- perimeters: 3
- solid layers (top/bottom): 5/4
 

 

 

Tags