Car Scissor Lift 8L Compressor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Car Scissor Lift 8L Compressor Mount. Drilling Required.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
My 100L compressor was irksome to start up just to activate the brake release on the scissor lift.
I looked into other silent options such as em actuators, but the cost of one was 80 euros, vs a £70 small compressor that did the job.
Once I decided on the compressor, I needed a way for it to be portable and wheel around with the main control unit of the scissor lift.
Holder (Upper Part) has 2 parts, They need to be printed separately, and the top only serves as a guide to help you position the compressor where both of the legs are positioned adjacent to the body of the scissor lift.
I used a pair of clamps to hold it in place. Decided not to attach with tabs, to keep the look clean.
4 holes are required:
2 x 10mm for the handle (top bearing weight)
2 x 8mm for the leg (support weight)
Printed in PETG-HF Bambu material.
Compressor is 15KG, and is comfortably supported, offset from the control unit frame to reduce noise.