Car Scissor Lift 8L Compressor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Car Scissor Lift 8L Compressor Mount. Drilling Required.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My 100L compressor was irksome to start up just to activate the brake release on the scissor lift.
I looked into other silent options such as em actuators, but the cost of one was 80 euros, vs a £70 small compressor that did the job.
Once I decided on the compressor, I needed a way for it to be portable and wheel around with the main control unit of the scissor lift.
Holder (Upper Part) has 2 parts, They need to be printed separately, and the top only serves as a guide to help you position the compressor where both of the legs are positioned adjacent to the body of the scissor lift.
I used a pair of clamps to hold it in place. Decided not to attach with tabs, to keep the look clean.
4 holes are required:
2 x 10mm for the handle (top bearing weight)
2 x 8mm for the leg (support weight)
Printed in PETG-HF Bambu material.
Compressor is 15KG, and is comfortably supported, offset from the control unit frame to reduce noise.