Case for ESP32 WROOM (38 pins)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom ESP32 case with full pin access, secure board fit, and easy lid removal with fingernail
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 268
- Wydruki
- 4
- Wyświetlenia
- 794
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
There are quite a few cases for ESP32-ESP-WROOM-32 on this site, but I liked @jacek's case for ESP32 Lolin Lite (https://www.printables.com/model/452247-case-for-esp32-lolin-lite-usb-c-snap-fit) and decided to make an analog for my MCU from scratch.
The case is designed to use a Dev Board with soldered pins — which is how they are most often sold. You will have full access to all the pins to connect Dupont plugs to them. The board is held in the case well enough that there is no rattling when you shake it. The reset and reboot buttons are accessible and yet unlikely to be accidentally pressed.
The latches hold the lid securely, but it's still possible to open the case with a fingernail or other thin object.
If you like this case but have a different connector or board size, let me know and I'll add modifications.