1 / 9
2020 T-slot 6mm extrusion antenna magnet mountpoint — zdjęcie 1
1 / 9

2020 T-slot 6mm extrusion antenna magnet mountpoint

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic antenna mountpoint 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole.Make sure…

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Magnetic antenna mountpoint 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole. Make sure screws are actually magnetic, stainless screws won't work for this! Extra hardware needed:

  • 6x M6 x 6mm steel screws
  • 1x M6 x 16mm steel screw
  • 1x M6 hammer nut
  • Aluminium or copper tape, about 30x30 mm

The metal tape is to electrically connect all the screws together, the long screw connects to the extrusion. You don't need to tap the hoels before screwing scres in, but attach the piece to a piece of 2020 so it's held pretty solid.

Category: Electronics

Tagi