1 / 9
2020 T-slot 6mm extrusion antenna magnet mountpoint
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic antenna mountpoint 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole.Make sure…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Magnetic antenna mountpoint 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole. Make sure screws are actually magnetic, stainless screws won't work for this! Extra hardware needed:
- 6x M6 x 6mm steel screws
- 1x M6 x 16mm steel screw
- 1x M6 hammer nut
- Aluminium or copper tape, about 30x30 mm
The metal tape is to electrically connect all the screws together, the long screw connects to the extrusion. You don't need to tap the hoels before screwing scres in, but attach the piece to a piece of 2020 so it's held pretty solid.
Category: Electronics