1 / 3
End cap for 2020 B-type aluminium extrusion (6mm slot) — zdjęcie 1
1 / 3

End cap for 2020 B-type aluminium extrusion (6mm slot)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

End cap designed to fit 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole.Added thickness…

Ocena
0 / 5
Polubienia
6
Pobrania
84
Wydruki
1
Wyświetlenia
261
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

End cap designed to fit 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole. Added thickness is 1mm., the inside fingers are 5mm,

It's a bit fiddly to put on but then it should sit pretty well. If you get a warning about unsupported bridge or similar, it should not be a problem. There is a 1-2 layer gap under the part that's supposed to be springy so it doesnt stock too much the layer under it.

Category: DIY

Tagi