1 / 3
USB-C PD to Anderson Powerpole - alternative cover — zdjęcie 1
1 / 3

USB-C PD to Anderson Powerpole - alternative cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix for USB-C PD to Anderson Powerpole adapter to allow post-build configuration

Ocena
0 / 5
Polubienia
11
Pobrania
41
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

The output voltage of the PD Trigger PCB is configured with tiny little DIP switches. After you configured the pcb, you'll screw the cover on. I wanted to be more flexible with my voltage selection e.g. 15V to charge LiFePo4 batteries which have a BMS or to run my (tr)uSDX transceiver and I didn't want to put the voltage regulators at risk - therefore I remixed the model and included a small window which leaves the DIP switch for later configuration accessible.

I also included a relief for the LED. Depending on your filament choice the LED is clearly visible one the PD trigger pcb is connected to power. You can also use it as an indicator where to drill a hole in case you want the LED clearly visible.

Thanks @DG1JAN for the PD-Trigger enclosure.

Tagi