1 / 3
USB-C PD to Anderson Powerpole - alternative cover — image 1
1 / 3

USB-C PD to Anderson Powerpole - alternative cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix for USB-C PD to Anderson Powerpole adapter to allow post-build configuration

Rating
0 / 5
Likes
11
Downloads
41
Makes
0
Views
386
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

The output voltage of the PD Trigger PCB is configured with tiny little DIP switches. After you configured the pcb, you'll screw the cover on. I wanted to be more flexible with my voltage selection e.g. 15V to charge LiFePo4 batteries which have a BMS or to run my (tr)uSDX transceiver and I didn't want to put the voltage regulators at risk - therefore I remixed the model and included a small window which leaves the DIP switch for later configuration accessible.

I also included a relief for the LED. Depending on your filament choice the LED is clearly visible one the PD trigger pcb is connected to power. You can also use it as an indicator where to drill a hole in case you want the LED clearly visible.

Thanks @DG1JAN for the PD-Trigger enclosure.

Tags