light hoop for dartboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a hoop with an offset to allow foam to be installed around the target. Diameter of 71cm and 18cm from the wall
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
The structure consists of three models. The first [obruc_pre_konzolu] needs to be printed 4 times, it is used to insert the legs. So the leg model [konzola] also needs to be printed 4 times. The legs are used to attach to the wall. The last model [obruc_bez] needs to be printed 8 times.
By connecting 4x "obruc_pre_konzolu" and "obruc_bez", we will create a circle with a diameter of 71cm. Although the parts will hold together well, I recommend gluing the joints. In my case, the legs of the console just had to be pushed in, if you think they are too loose, there is a hole on them for a solid connection, for an M4x10 screw. To attach to the wall, one screw per leg is enough, even though there are two holes on the leg. Use a screw, for example, 4mm with a length of about 45mm.
All that remains is to glue the LED strip and start the game :)