light hoop for dartboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a hoop with an offset to allow foam to be installed around the target. Diameter of 71cm and 18cm from the wall
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
The structure consists of three models. The first [obruc_pre_konzolu] needs to be printed 4 times, it is used to insert the legs. So the leg model [konzola] also needs to be printed 4 times. The legs are used to attach to the wall. The last model [obruc_bez] needs to be printed 8 times.
By connecting 4x "obruc_pre_konzolu" and "obruc_bez", we will create a circle with a diameter of 71cm. Although the parts will hold together well, I recommend gluing the joints. In my case, the legs of the console just had to be pushed in, if you think they are too loose, there is a hole on them for a solid connection, for an M4x10 screw. To attach to the wall, one screw per leg is enough, even though there are two holes on the leg. Use a screw, for example, 4mm with a length of about 45mm.
All that remains is to glue the LED strip and start the game :)