1 / 1
Fujitsu RX1330 (M5) 3.5" caddy with screw holes — zdjęcie 1

Fujitsu RX1330 (M5) 3.5" caddy with screw holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified the great 3.5" caddy model by @Poty_1688301 to include screw holes for 2.5" drives + slightly thicker walls

Ocena
0 / 5
Polubienia
5
Pobrania
41
Wydruki
0
Wyświetlenia
164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

The model provided by @Poty_1688301 already worked great for mounting 3.5" HDDs in my Fujitsu RX1330 M5, yet I wanted to be able to switch between 3.5" and 2.5" drives without printing separate caddies.

Thus my remix adds screw holes for 2.5" drives as stated by the specification for 2.5" form factor drive dimensions SFF-8201. Also I have chosen to make the print slightly stiffer by increasing the wall thickness. I don't know if this decision impacts the use in other models of the RX1330 series, but it certainly worked for the M5.

I also uploaded a second version in which I tried to allow for light guides for the drive status lights, for which I hoped to be able to use transparent PETG filament - which did not work at all. Still, proper fiber optics could work here, so maybe someone will find these useful as well.

Tagi