Bike Anemometer (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small anemometer to serve as moving decoration on your bike handle.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This model doesn't plan for electronic parts but is meant as a simple yet nice decoration for your bike. It will spin following the wind and your speed, serving as a fun eye-catcher to passer-bys. It requires a 608(zz) bearing and the base model to work.
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. The pieces should press-fit but you can always use a bit of glue to ensure the scoops will stay in place.
Printing information:
- Print this model as light as possible, 2 walls and no infill works well
- You need to print 3 scoops and 1 hub
- Print the scoops dome up and the hub on its head (the parts come already oriented in the recommended way)
- Use regular supports for the center of the dome of the scoops, but deactivate supports for the hub
- No brim is needed but it can help increase adhesion to the printbed
- I recommend using PETG or at least a non-porous material, as it will need to resist the weather.
Note that the scoop step file has, for some reason, some small defects at the base of the dome. For this reason, I recommend using the stl file to print this part.
Please refer to the base model for more information.