Prusa SL1S SPEED Resin Tank Drainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the resin tank securely above the container when draining the tank, to free your hands for other tasks.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A remix of the excellent resin tank drainer by @K9DefenseTech_8289. It holds the SL1S resin tank vertically with a slight forward tilt, so that the resin flows smoothly along one corner into a container below.
I wanted one to fit a standard laboratory retort stand that I already had. I added a cradle mount directly to the cradle so it's now a single printable piece. The 13 mm hole allows the printed part to glide easily along the metal rod (diameter = 12.5 mm) of the retort stand, so the cradle can be easily raised or lowered. I added two M3x10 screws to the back to tighten against the rod, which secures the cradle in place. The screws go through two square nuts (M3nS) embedded in the plastic, à la the Prusa printer kits, so I don't have to worry about the screw holes in the plastic wearing out and losing grip over time.
Print settings
Printed in PETG, 0.4 mm nozzle, 0.20 mm layer height, 15% gyroid infill, organic supports on build plate only.
I think I could have printed this successfully without supports. The supports left an unsightly mark on the top surface but otherwise have had no adverse impact on the part's functionality.