Prusa SL1S SPEED Resin Tank Drainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the resin tank securely above the container when draining the tank, to free your hands for other tasks.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A remix of the excellent resin tank drainer by @K9DefenseTech_8289. It holds the SL1S resin tank vertically with a slight forward tilt, so that the resin flows smoothly along one corner into a container below.
I wanted one to fit a standard laboratory retort stand that I already had. I added a cradle mount directly to the cradle so it's now a single printable piece. The 13 mm hole allows the printed part to glide easily along the metal rod (diameter = 12.5 mm) of the retort stand, so the cradle can be easily raised or lowered. I added two M3x10 screws to the back to tighten against the rod, which secures the cradle in place. The screws go through two square nuts (M3nS) embedded in the plastic, à la the Prusa printer kits, so I don't have to worry about the screw holes in the plastic wearing out and losing grip over time.
Print settings
Printed in PETG, 0.4 mm nozzle, 0.20 mm layer height, 15% gyroid infill, organic supports on build plate only.
I think I could have printed this successfully without supports. The supports left an unsightly mark on the top surface but otherwise have had no adverse impact on the part's functionality.