SpeedyEFI Speeduino Mount for Datsun 620
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Fishdog Speeduino to your Datsun using existing holes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe it could be rotated to mount on the left side as well.
It's a very tight fit, so if you print one and have severe clearance issues, just scale your print appropriately.
I added a version that uses M4 lock nuts as well as one with integrated M5 threads.
- If using locknuts, you will need 2x of M4x12mm flat head socket screws
- For printed threads, use 2x of M5x10mm flat heat socket screws
You will need to tap threads in the case for M4 as well as grind the four spots on the lid away to not interfere with the screws into the case.
Print in the orientation that most makes you happy.