Liczymy pasujące modele…
Based on the Standalone Touch ID Module by SnazzyLabs , this new version of a Standalone Touch ID Module provides a multitude of improvements. TODO: Add more pictures of assembly Add clear instructions around battery connection and…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
A lightweight clip/holder for STROBON Cree® Standalone strobe light for a DJI Mavic Mini or Mini 2 Each clip is around 1.6g when printed with PLA, On my Mini 2, the drone weighs 249.7g with 2 of these attached, including the strobe light.…
Shout out to Slabua , building his Heltec v3 case introduced me into LoRa , got me curious about CAD and thus helped lead me to this creation; thanks for sharing your build ! This folding case fits the Heltec ESP32 V3 LoRa board intended…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
This is a standalone console I've put together. It prints in three parts but is easily expandable. The parts are simple: Raspberry Pi 3 B+: https://www.adafruit.com/product/3775 Stereo Speaker bonnet: https://www.adafruit.com/product/3346…
I couldn't fit the full case on my printer (Anet A8) and had lots of parts made already. I didn't want to scale and reprint, so I decided to make this standalone stand. Category: Toys & Games
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
I remixed the extruder knob for the Galileo2 standalone extruder (G2SA) to include some swirls. You can split the STL into parts or use the 3mf file.
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
Based on the Standalone Touch ID Module by SnazzyLabs , this new version of a Standalone Touch ID Module provides a multitude of improvements. TODO: Add more pictures of assembly Add clear instructions around battery connection and…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Apple Magic Keyboard（Touch ID搭載）から取り出したモジュールを外付けボタンとして使うための3Dプリントケースです。 最新スライサーでは3MF推奨、古い環境はSTLを使用してください 検証環境： bambu lab a1 mini © 2025 macaron. All rights reserved. 個人利用に限り、本データのダウンロードおよび3Dプリントを許可します。 禁止事項： - 再配布・再アップロード（ファイルや改変物の共有を含む）…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
Simple(ish) snowman model for use as a lamp and nice decoration on the table. IMPORT ALL MODELS AS A PROJECT. All supports are added and coloring for MMU. Made for Prusa XL but you can change the type to any multi color capable printer or…
It's been unreasonably cold here in Florida lately, so for the first time, I've had some warping issues printing ASA (my primary filament). Anyways, I also wanted to get slightly higher chamber temps. I had used a single 100w heater in a…
This standalone Rainbow Trout sculpture captures the sleek form and distinctive markings of the species. Flowing fins and detailed scales provide realistic aquatic texture while keeping printing clean. Designed without a base, this trout…
This standalone Bluegill figure features accurate fish anatomy with smooth flowing fins and scaled body textures. Designed without a base, it makes a charming addition to desktop displays, shelf decor, or freshwater hobby collections.…
This standalone Channel Catfish statue features realistic anatomy, including signature whiskers, flowing fins, and textured scales. Designed without a base, it’s ideal for desktop displays, hobby fish collections, or freshwater-themed…
This standalone Crappie statue features accurate fish anatomy, smooth textured scales, and flowing fins for realistic detail. No base is included, making it ideal for desktop displays, shelf decor, or freshwater fish collections. Prints…
This standalone Walleye statue captures the sleek, elongated body and characteristic fin shapes of the species. Designed without a base, it works perfectly for hobby collections, desktop displays, or freshwater-themed decor. Prints…
This standalone Smallmouth Bass statue features a sturdy, well-proportioned body with textured scales and realistic fins. No base is included, making it perfect for desktop displays, hobby collections, or freshwater-themed decor. Prints…
This standalone Brown Trout statue highlights detailed scaled textures, flowing fins, and a lifelike curved body. Designed without a base for easy display on shelves, desks, or hobby collections. Prints cleanly in matte PLA with subtle…
This standalone Striped Bass statue features accurate anatomical detail, including textured scales and flowing fins. Designed without a base for clean desktop, shelf, or hobby display. Prints in matte PLA with subtle FDM layer lines…
This standalone Muskie statue highlights the elongated body, realistic fin placement, and detailed scaled textures. No base is included, making it perfect for desktop or shelf displays and hobby collections. Prints well in matte PLA with…
This standalone Yellow Perch statue features realistic anatomy with textured scales, detailed fins, and a lifelike curved body. No base is included, making it ideal for hobby displays, desktop decor, or freshwater collections. Prints…
This standalone King Salmon statue features detailed scales, flowing fins, and lifelike body curvature. Designed without a base for clean display on desks, shelves, or hobby collections. Prints beautifully in matte PLA with subtle FDM…
This standalone Sockeye Salmon statue highlights detailed scales, flowing fins, and lifelike body shape. No base is included, making it ideal for hobby displays, desktop decor, or freshwater fish collections. Prints beautifully in matte…
Simple 3d scanner table with an inset base that can slot over the cheap $10 AliExpress or eBay motorized photo display tables. Simply cover with reflective dots for laser scanning or white dots for infra-red. You can of course just move…
This is a 4-part standalone enclosure designed for the SpoolSense project, built specifically to house an ESP32-S3-Zero , PN5180 NFC reader , and a 16x2 I2C LCD display . The goal of this design was to create a clean, desk-friendly…
Legs to convert wire shelving into a small freestanding shelf. I needed a small plant stand to raise seed starting trays to catch additional sunlight. I had a piece of old wire shelving (1/8" diameter wire spaced 1" apart) so I cut down…
Standalone stand for nebula pad. IDC 10 pin 2,54mm male/female extension cable do work to extend the Nebula cable → https://www.ebay.com/itm/272617069892?var=571737481000 Alternative - the Nebula Pad cable is attached to the mainboard on…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
When moving some Eurorack gear into a 19" server style rack, I noticed the 84hp frames that were supposed to fit left ~4hp in wasted space on the sides. So I bought some 104hp Synthrotek rails and cut them down to 17 ⅝" (88hp) to give…
Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Filament brand: Eryone Filament color: Weiß Filament material: PETG
Versatile 3D printed hex container for pens, pencils & more. Attaches to Honeycomb walls or mounts directly! I designed this hexagonal container designed for Honeycomb Storage Walls, but adaptable for any wall space! To install on a wall…
We recommend to ESD coat all plastic parts or print with ESD safe plastics. The parts are self explanatory for the machine owners. We cannot provide any photos as the machine was decommissioned The standoffs are designed to have magnets…
print test samples before printing the full model. you may need some mods. inspired by Tophattwaffle on Thingiverse. https://www.thingiverse.com/thing:3513661
A standalone filament pre-gate sensor that uses lever switches instead of the more typical ball bearings and switch approach. This sensor can be used both for the ERCF/Tradrack MMUs using Happy Hare, as well as a standalone filament…
i was dissatisfied with the other mods due to a lack of sturdiness so i designed my own. uses some heat inserts and left over t-nuts from the kit that slide into the bottom of the 3060 profile, in conjunction with a press fit into the…
For those who want to just buy one ready to go here's my stores. Link bellow. <<Harutech Shop Here>> Buy Full Assembled here <<Etsy Shop Here>> <<Tindie Shop Here>> This is a case designed to build a standalone Meshtastic communicator…
Remix of drybox with humidity sensor. I only added window.
Holder for WS2 multiprobe water sensor. Measure Rancilio Silvia espresso machine water tank level and report the information to home assistant via a template sensor and the ESP home integration . BOM WS2 water sensor and 3 probes 6 10mm…
Screen Antics: Johnny Castaway Standalone Screensaver This is a standalone version of the famous Johnny Castaway Screensaver from the 90s. I always wanted to do this, so, let's jump right in. It's not that hard. You need some RaspberryPi…
This is a modified version of this christmas light stand that allows these bubble lights to more easily stand upright without screws or tacks. I also added two small brackets to hold the electrical cord. It is recommended to add supports…
Building on the excellent work by SnazzyLabs and Jamie's efforts to box up the guts of an Apple Magic Keyboard for the Touch ID sensor, I present my take. Notably, I wanted it to be wireless so I lengthened the box to fit the battery.…
My Wife has a Washi tape collection that she wanted to sort neatly in a hacked Ikea Knagglig storage box she trimmed and stained to fit on some shelves to store hobby equipment. She was initially going to make this from plywood but we…
Standalone version of the tiny inline filament runout sensor. BOM Kailh microswitch (or similar) 6mm steel bearing ball Short piece of the 4mm PTFE tube x3 M2x5 tapping screws M3 screw M3 t-slot nut Printing Use the 0.08-0.1mm layer…
An enclosure for the cute little 128x32 monochrome OLED I2C displays with connectors for the fischertechnik construction toy system with a lean size of 45x15x7,5mm. The I2C connectors are labeled SD A SC L** 5 V G**ND. The bottom part…
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
Update 2020-04-21: I made a better 16x2 I2C display here: https://www.thingiverse.com/thing:4301853 Changelog: 2018-10-30: added standalone version without fischertechnik connectors; changed name accordingly A simple enclosure for this…
This is a standalone device with very low power consumtion compatible with FakeTec board. Easy to print and build. Enjoy it! I tested to send messages and traceroute between 13.5km with no problems. You can find all the files in the…
This model is used as standalone base to use with lamps designed for the mechatronics base. Print settings for woodfill filaments: Print settings: 0.30 mm DRAFT Filament: PLA woodfill 15% Grid infill 0.6 mm nozzle to avoid clogs NO…
This is a handguard for MP5 CYMA model inspired by MP5K and Romanian grips. Huge thanks to @michalgerhat for creating a basic handguard that i used as my canva and to https://makerworld.com/en/@SJHCreate that created the foregrip. All i…
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
The DJI O4 Air Unit is a perfect video transmission and recording solution for small copters, such as whoops. But it can take up to 9W power which leads to overheating if there is no quite strong air flow around. So it is not possible to…
I remixed the extruder knob for the Galileo2 standalone extruder (G2SA) to include some swirls. You can split the STL into parts or use the 3mf file.
Get ready to bring the undead to life with this 16-inch (10x scale) Skeleton minifigure! Designed as a standalone template , this eerie yet articulated figure is perfect for spooky displays, custom creations, or Halloween builds! 🎃👻 🦴…
Set sail for adventure with the Skeleton Pirate Giant Minifigure! This 16-inch (10x scale) undead buccaneer is an expansion of the Skeleton Giant Minifigure, featuring classic pirate gear for the ultimate high-seas haunt! 🌊👻 🏴☠ Model…
Swing into action with the Spider-Gwen Giant Minifigure! This 16-inch (10x scale) figure is an expansion of the Classic Modular Minifigure , capturing the essence of Gwen Stacy's iconic alter ego. 🕷 🕸 Model Features: Legs require…
ENHET standalone feet. You need two pieces and can simply mount it instead of the original front legs. No glue is requiered because it has a clamp design. Make sure you check the orientation of the part. To level it out I made a 3mm and a…
Print using a generic cube modifier over the bottom of the plate to add a grid pattern as per photos if desired. - Sample 3mf with modifier is included.
I built this to mount my RackPi 2HE Rackmount for Blackmagic Design Micro Converter 3G/12G to a Jib, Tripod Leg or Camera Cage but it should work with other RackPi style Equipment for DAP MP-1 Rack (Opening: 68mm x 39mm) Designed to print…
I wanted this for the tops of an arch I bought ages ago from Wilko when they were still in business. The arch turned out to be far too big for our garden, and I decided to leave out some of the rounded arch sections at the top and convert…
Added some clearance needed at the hinge so it doesn't brake when assembling.. Also added some room for a double sided tape to attach the boxes to my printer (I had some 3M VHB tape lying around..). Tape groove is 19,5x119,95mm with a…
Spooltower - A Center-Mount Standalone Filament Spool Holder If your (Voron) printer can no longer hold its own filament, the Spooltower offers an easily printed, stable solution to secure your plastic. Instead of relying on specific…
Case for the SIM7600G-H-M2 4G when not being used as a Raspberry Pi HAT. Waveshare Wiki for the device: https://www.waveshare.com/wiki/SIM7600G-H-M2_4G_HAT Printing This was designed to be printed on a resin printer, with the flat side of…
This holder slots into the original lid flap. The two parts simply screw together. This keeps the box as airtight as possible while also enabling easier servicing of the desiccant. It can now be swapped in a few seconds and even dried…
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
It is the same as original (see https://www.printables.com/model/1053284-standalone-filament-sensor-happy-hare-ercf-tradrac ), just for different lever version. I like the bigger arc of D2F-L30 more.
UPDATE (June 3, 2025): Added a Heltec LoRa32 V3 revision of the case. This is untested! If you print one, please post a make - I would love to hear any and all feedback, especially if it needs work! — I'm very excited to share my first…
My older van had no cup holders so I made a version to bring the van into the 21st century. The universal base plate can be attached securely to a flat surface out of the way of car controls and then the cup holder of your choice slides…
This a simple and effective 3D printed snowflake decoration. It consists out of three necessary parts (snowflake center, outside 1 and outside 2) and one additional part (diameter reducer). Dimensions (assembled): 146 mm x 146 mm x 126 mm…
Requirements: 4 18.6mm Length, 6mm M2.5 Threaded Standoffs, M-F for bottom threads 4 20mm M2.5 Screws as top screws. 4 M.2 HAT + / AI KIT/ AI HAT +/ SSD KIT official included plastic Threaded Standoffs. 4 14 mm M2.5 (can be longer) Screw…
The intellical wavelength calibration light source is designed to be attached to directly to a spectrometer for calibration purposes. If you want to use the contained Hg and Ne lamps standalone, this adapter is useful to limit to exposure…
Standalone name tag with the name Owen. Balance is good as long as it is undisturbed. If the furniture is shaken, will likely fall. 147mm in length 53mm tall 6mm wide 34 grams
I made this model, because recently I got a 3 kg spool of filament, and my printers spool holder would probably break, since it's really only made for 1 kg of filament. (Its also 100% 3d printed! no screw's or bearings needed, the only…
This garden light can be used as a floor, wall, or hanging light. It is approximately 40 cm high, making it a full-size fixture. It is prepared for an E27 socket. Please use only LED bulbs (otherwise, excessive heat generation is…
Yet another remix of the Lack leg extension. This time, it is a 6 inch [152.4 mm] lift, plus a 1 inch pocket for the bottom of the leg. Two screw holes for optional use for the same reason as the design I remixed from. Total height is 7…
I got really fedup with other standalone mods where you need to turn the printer on its side, so i designed one where you can easely remoove the box from under it. All printed ou of PETG, 0.2mm layer height, 4 wall Can all be wired with…
DE: An dieser Stelle mal vielen Dank an xxricsxx für die Bereitstellung der ganzen Daten. Ich habe das Ganze etwas weiter getrieben und mein Ziel - möglichst alle Originalteile zu verwenden - erreicht. Vor allem die Buchsen für Hotend und…
This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…
When you need to hold your ESC but don't have fancy tools! This is a very simple but yet efficient way to hold your esc in place when soldering. How to print: PLA - 12% Infill - in place To mount: you can let it stand on a mat you can…
Note: This is a work-in-progress and will likely change over time! Any currently available files are tested and working. Future revisions may fix minor issues, or potentially add new features. — Presenting my second major CAD project, and…
This clips onto the horizontal pole under the saw. The clip fits a 19.5mm diameter. Since the clip is screwed on, the box can be used stand alone or a clip made of your own design or other type of mount. Inside box dimensions are 14mm x…
I liked Brekel‘s design, but didn’t have a Bambu spool, so I changed the sizing a bit and made a screw-on top. The outside screws on, and the inside of the lid just snaps in to keep all your beads in the container. I also made a divider…
A simple mount for having the Quattrobox GateSwitchEncoderHub mounted an a 2020 Profiles. It was a Test to get the encoder on top of my Ender 3. You need 2 M3x10 screws to mount the hub onto the bracket. The bracket itself utilises 2 2020…
Description Work In Progress! -But works well :) This is for you if you want to save the good LTL120QL01 12" 2160x1440 Screen from your weak old Tablet. I did not manage to resurrect the Touch controller but the Panel itself is a very…
Printed with 4 Perimeters, 15% Adaptive Cubic infill with PETG. Paint supports on the hole ceiling, change Support Options “top contact z distance” to .25 and “Pattern Spacing” to 3mm for easy to remove support.
This is a remix of the non-modular variant of https://www.thingiverse.com/thing:3375023 by vzero1, also posted as a remix there. If vzero1 posts the original here I'd be happy to tag directly as a remix here. I'm keeping the license as…
STL file dimensions in mm Step file dimensions in meters
Apple Magic Keyboard（Touch ID搭載）から取り出したモジュールを外付けボタンとして使うための3Dプリントケースです。 最新スライサーでは3MF推奨、古い環境はSTLを使用してください 検証環境： bambu lab a1 mini © 2025 macaron. All rights reserved. 個人利用に限り、本データのダウンロードおよび3Dプリントを許可します。 禁止事項： - 再配布・再アップロード（ファイルや改変物の共有を含む）…
You can find me and the rest of the EX3D crew in the Psych Ward on Discord WIP as of 8/17/25 Stock hardware from the SV08/Zero’s planetary gear extruder repacked into a Sherpa Mini-mounted standalone unit. Print the ring gear with random…
This is a simple stand for a wall mounting ring camera that will enable it to stand alone. For example if you wanted to put it on top of a shelf, a building, etc. It does not have mounting holes in the feet. I designed it to use minimal…
I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…
Further to my BB-8 design, I thought he needed a friend.. welcome BB-9 :-) Print instructions Print with no supports :-)
Great thanks to FourMix for the mod kit which I largely used, especially for the electronics. Some edits made to accommodate extra touch sensor wiring and different cable routing. I also did have to redesign the PSU bracket attachment…
Universal ESP32-CAM Case and Stand holder with wide lens compatibility. More holes for good ESP32 ventilation. Screws are M3, 6 or 8 mm length. Made for ESP32CAM with ESP32-CAM-MB tinker board. Printed using PLA.
This is an organizer that can be hung on Slatwall, screwed to the wall, or sitting on your desk at the office. The insert can be changed out to meet your changing needs. This is designed to be used with Slatwall with a 51mm repeating…
📝 Description Outline: 1. Overview / Purpose When flight simming, I could either have my throttle quadrant mounted on top of the desk, with the mounting system available for my modules or other components, or I could have the throttle…
To assemble, glue the 2 feet to the pegs on the fence. If you like it, leave a comment and rating! It really helps.
