1 / 3
Collision free Prusa Standalone drybox (with Tape groove) — zdjęcie 1
1 / 3

Collision free Prusa Standalone drybox (with Tape groove)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cleared some collisions (hinge etc.), made some space for a double sided tape

Ocena
5 / 5
Polubienia
15
Pobrania
76
Wydruki
2
Wyświetlenia
1061
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Added some clearance needed at the hinge so it doesn't brake when assembling..
Also added some room for a double sided tape to attach the boxes to my printer (I had some 3M VHB tape lying around..). Tape groove is 19,5x119,95mm with a depth of 0,8mm (my tape was 1,1mm thick but needs some compression to work. Leaves a very small yet visible gap in the assembled position.
Also a print for the axles is included, so you don't have to cut the originals.

For the silica balls I like malolo's containers, as those prevent the balls from clogging the outlet when using the hinge in the table. (Don't worry about the 50% humidity - there was no silica in at that time)

 

Edit: Added a bottom part with a wider filament path to fit to https://www.printables.com/model/1428008-ptfe-connector-to-prusa-drybox and feed the PTFE Tube directly into the drybox.

Tagi