Collision free Prusa Standalone drybox (with Tape groove)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cleared some collisions (hinge etc.), made some space for a double sided tape
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 76
- Makes
- 2
- Views
- 1,061
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Added some clearance needed at the hinge so it doesn't brake when assembling..
Also added some room for a double sided tape to attach the boxes to my printer (I had some 3M VHB tape lying around..). Tape groove is 19,5x119,95mm with a depth of 0,8mm (my tape was 1,1mm thick but needs some compression to work. Leaves a very small yet visible gap in the assembled position.
Also a print for the axles is included, so you don't have to cut the originals.
For the silica balls I like malolo's containers, as those prevent the balls from clogging the outlet when using the hinge in the table. (Don't worry about the 50% humidity - there was no silica in at that time)
Edit: Added a bottom part with a wider filament path to fit to https://www.printables.com/model/1428008-ptfe-connector-to-prusa-drybox and feed the PTFE Tube directly into the drybox.