5015 Adapter for E3D V6 Heatsink Cooling Duct (Standalone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 5015 Blower fan adapter for the stock heatsink cooling fan shroud. The setup is more effective than using…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 5015 Blower fan adapter for the stock heatsink cooling fan shroud. The setup is more effective than using 3010 or 4010 Axial Fans. You may use two screws to secure it on the stock fan shroud and another pair with nuts to attach the 5015 blower fan.
Update:
I have added a tilted version (10degrees from the horizontal) to direct airflow towards the lower portion of the heatsink. You may use the flat version if you want.
This setup is suited well if paired with my part cooling fan duct on BMG: Click Here.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament: Ge PETG Silver
Notes:
PLA works just fine.
I've used SolidWorks 2020 with Flow Simulation to visualize the airflow.
Category: 3D Printer Parts