EBB36 V1 + Orbiter 2.5 Mount w/ Spring Steel Slot (for Stealthchanger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for use with Orbiter 2.5 & EBB36 V1 toolboard, compatible with N3MI's Umbilical mod for Stealthchanger
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 137
- Wydruki
- 3
- Wyświetlenia
- 1075
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A mounting solution for use with Orbter 2.5 extruder & EBB36 V1 toolboard, remixed from LDO's Universal Mount to suit 36mm pancake motors
This toolboard is designed for use within the Draftshift Design Stealthchanger project, specifically with N3MI's Umbilical V2 Spring Steel mod for cable management. See link for details: https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2
BOM (per toolhead) for this mod is as follows:
- 1x ‘Toolboard-EBB36-WWG2’ printed part
- 1x ‘Umbilical Plate’ printed part
- 3x M3x5x4 heatset inserts
- 3x M3x6 bolt (for Umbilical Plate)
This part requires no support in your slicer, there is a built-in support block that should easily remove once printed. Recommended to print with default Voron settings.
Please note the ‘Umbilical Plate’ printed part originally comes from jwellman80 on Github, which you can find here: https://github.com/jwellman80/VoronMods/tree/main/EBB36%20Umbilical%20Clip%20Mount